Panasonic HC-V160, Operating Instructions Manual

Page: 45 / 100

- 45 -
Detected faces appear with frames.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen take
preference over others.
∫ Prioritised face framing
Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness will be
performed against the prioritised face framing.
≥
The prioritised face frame is displayed only with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
You can record bright pictures even in dark places by slowing the shutter speed.
≥
Switch to Manual Mode. (
l
47 )
≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness.
≥
When the shutter speed becomes 1/25, the screen may be seen as if frames are missed and
afterimages may appear.
This is for reducing the wind noise coming into the built-in microphones.
≥
Switch to Manual Mode. (
l
47 )
≥
This function’s default setting is [ON].
≥ When switching to Intelligent Auto Mode, [WIND CUT] is set to [ON], and the setting cannot be
changed.
≥ You may not see the full effect depending on the recording conditions.
[FACE FRAMING]
: [RECORD SETUP]
#
[FACE FRAMING]
#
desired setting
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
[OFF]:
Cancel the setting.
[AUTO SLOW SHTR]
: [RECORD SETUP] # [AUTO SLOW SHTR] # [ON]
[WIND CUT]
: [RECORD SETUP] # [WIND CUT] # [ON]
HC-V160-EB&EP&GC&GA&GW&GN-SQW0092_mst.book 45 ページ ２０１４年１１月４日 火曜日 午後６時１５分