Panasonic GM1 Series, Reference Manual

Page: 36 / 98

4.4 Setting the Analog Output Unit
4.4.1 List of Analog_4OUT Parameters
The following table shows a list of changeable parameters for the GM1 Analog Output Unit.
Set parameter for each channel.
Parameter Default Settings
OutputProcess Output Select "Output / No output" of the analog output.
RangeSetting -10 V to +10 V
Select the output range.
-10 to +10 V
0 to +10 V
-5 to +5 V
0 to +5 V
+1 to +5 V
0 to +20 mA
+4 to +20 mA
AnalogOutputAtStop
Hold with user-
specified value
Select the operation of the analog output hold function
in the STOP mode.
Hold with user-specified value / Hold at current value
OutputValueAtStop 0
Specify the output value when OutputValueAtStop is
set to "Desired output value".
-32640 to +32640
(For -10 to +10 V, -5 to +5 V range)
0 to +32640
(For 0 to +10 V, 0 to +5 V, 0 to +20 mA)
0 to +25600
(For +1 to +5 V, +4 to +20 mA)
OffsetGainProcess No output
Select "Output / No output" for the Offset / Gain
processing.
OffsetValue 0
Specify the offset value for when the Offset / Gain
processing is executed.
-3000 to +3000
GainValue
10000
(multiplied by 1.0)
Specify the gain value for when the Offset / Gain
processing is executed.
+9000 to +11000 (multiplied by 0.9 to 1.1)
ScaleConversion No output Select "Output / No output" of the scale conversion.
ScaleConversionMaxValue 10000
Specify the maximum value after scale conversion is
executed.
-32768 to +32767
ScaleConversionMinValue 0
Specify the minimum value after scale conversion is
executed.
-32768 to +32767
UpperAndLowerOutputClipping No output Select "Output / No output " of the clipping function.
4.4 Setting the Analog Output Unit
4-10 WUME-GM1AIO-01