Panasonic GM1 Series, Reference Manual

Page: 37 / 98

Parameter Default Settings
UpperAndLowerOutputClipping
UpperLimit
0
Specify the upper limit of the clipping function.
-32640 to +32640
UpperAndLowerOutputClipping
LowerLimit
0
Specify the lower limit of the clipping function.
-32640 to +32640
4.4.2 List of Analog_4OUT I/O Mapping
The analog output unit is controlled by reading from and writing to the applicable channel using
the user program.
■
InputArea (input area)
● The asterisk ”*” represents the channel number. (0 to 3)
Channel type Type Description Remarks
Ch*_StatusRegister WORD Ch*_Status Register Sets the following statuses in bulk in units of
WORD.
Ch*_SettingErrorStatu
s BOOL Ch*_Setting Error
Status Turns ON when an error occurs.
Ch*_ClippingUpperLi
mitStatus BOOL Ch*_Clipping Upper
Limit Status Turns ON when the value exceeds the output
clipping upper limit while the clipping function is
executed.
Ch*_ClippingLowerLi
mitStatus BOOL Ch*_Upper and lower
output clipping Lower
limit Turns ON when the value falls below the output
clipping lower limit while the clipping function is
executed.
■
OutputArea (output area)
● The asterisk ”*” represents the channel number. (0 to 3)
Channel Type Description Remarks
Ch*_ OutputValue INT Ch*_Analog Output
Value Stores the digital value for the analog output.
The range of the stored value varies depending
on the setting range and scale.
Ch*_ RequestRegister WORD Ch*_Request Register Sets the following request in bulk in units of
WORD.
Ch*_ClippingFunction
ExecutionRequest BOOL Ch*_ Upper and lower
output clipping
Function execution
relay ON: The clipping function is executed.
OFF: "Ch*_ClippingUpperLimit" and
"Ch*_ClippingLowerLimit" are turned OFF.
Validity condition: Level
4.4 Setting the Analog Output Unit
WUME-GM1AIO-01 4-11