manualshive.com logo in svg

Panasonic FP Web-Server, User Manual, Page: 122 / 194

Share
Download
Panasonic FP Web-Server User Manual Download Page 122

FP Web-Server V2.11 

 

9.1 Dial-up Networking Setup for Computer/ FP Web-Server 

111 

Comment: 

The following screenshots were taken from a Windows 2000 operating system. The layout of 
other Windows operating systems may differ slightly. 

 

9.1.2  Modem and Dial-up Networking Installation of a Windows Client 

Configure and test the respective modem under "system settings", "modems". (For example, a 
"standard 28800 BPS modem" to COM 2 was used.) Do not forget to set the optional 
parameters correctly before closing "modem", "system settings". 

Comments: 

•

 

We recommend the Panasonic FP MODEM-EU for our customers in Europe.  

•

 

The driver "MdmFPmodem.inf" for the FP MODEM-EU (now supports all versions of 
Windows NT) can be found on the Configurator setup CD in the folder: 
"Other-Tools/PPP_Cable" 

•

 

For a null modem cable connection please find the necessary driver "mdmcisc2.inf" on 
the configurator setup CD in the folder: "Other-Tools/PPP_Cable" 

 

1.  Open the dialog "Phone and Modem Options" 

 

Summary of Contents for FP Web-Server



































































































































































































Reviews:

No comments