PAN1322
Application Note
63
Revision 1.2, 2013-12-18
Design Guide
5.
Now the frequency has to be adjusted by repeating step 4 with different values. The
frequency will be lower with a higher value of the capacitance array.
6.
When the desired accuracy of the 32 MHz clock is obtained, store the corresponding
trim value to the parameter Osc_Trim of the BD-data. This can be done by clicking
the button “Write BD-Data” in HCI Lite tool. In the pop-up window, only change the
parameter OSC_Trim to the calibrated value and give the module an individual
BD_ADDR. (See in
7.
Issue a HW reset of the device.
