By selecting one of the output displays an
Add
Output
dialogue
allows you change the Actual
Size of the display to adjust the display size for
bezels and under scans.
You can also change the
Display Type
which
will also change the setting in the
General/Outputs menu
.
Hitting
OK
will place a representation of the
Output
display on your
Layout
which will be centred over a 0/0
cross hair which indicates the centre of the
Layout
area
.
The side bar shows settings relating to the
Output
display that is currently selected.
Zoom All
– changes the
Zoom
value to include
all
Output
displays in your layout.
Centre Layout Origin
– Centres the layout to
0/0.
Name
– allows you to change the Output
name.
Width/Height in Layout
– this is where you can
edit the size you set when you originally
selected the
Output
to be shown on the
Layout
.
Playout Centre
– we can move the displays
using these controls to place the displays
together to represent the way they are physically mounted. Normally, we use the
Image Positioning
Mode
to change the position of
Output
displays.
Rotation
– a control to change the rotation of the
Output
display in one degree
increments/decrements.
Resolution
– Allows you to edit the Output setting as selected in the
General/Outputs menu
.
Display Type
- Allows you to edit the Output setting as selected in the
General/Outputs menu
.
Underneath the
Take
button you can select an
alignment grid using
Grid Setup
.
Grid Setup
gives you fill control over the
Grid
including
Step Size
for spacing,
Rotation
and
Offsets
.
17
