Video Walls
Base Size
(Only used for different display/screen size layout in one canvas)
Base Size
is used to make layouts consisting of different sized monitors
of the same resolution optimising the layout resolution to the system’s
internal operation.
By default
Base Size
is set to zero which turns off the function. However, when we start to work with
a series of differently sized displays but with the same resolution we need to set our
Base Size
which
is a useful aid in producing the required positioning and sizing.
Firstly, take one monitor as a reference –
measure the horizontal physical display
excluding the bezel (it is also useful to note
down bezel size at the same time) – enter that
as a base size.
Now, when another output is added to a layout
a new Base Size can be set to match that
screens size.
It is useful to note that the physical measurements do not have to be any particular type of unit –
mm, inches and pixels are possible which allow for even the largest displays to fit with the 8000 x
8000 unit allowance.
19
