Installation Tips
Case 1 :
Create large video wall with multiple units of ET-MWP100G
In order to display Highest quality video wall like for the control room, it is neccessary to distribute
EHQ windows for each displays. However ET-MWP100G can distribute up to 8 EHQ windows, so that
multiple units may be required for the large video wall like 3x4 (12units) .
2 units of ET-MWP100G can cover up to 16 EHQ windows, so that they can distribute dot-by-dot
native resolution for 3x4 video wall.
Here is tips to do in order to design for large video wall.
Before start:
Please change IP address for either of ET-MWP100G by referring page 9 to change default IP address.
Setting procedure (ie. 3x4 Video wall)
1) Need tos separate network diagram for the left side and right side.
2) One ET-MWP100G should connect to 6 displays on the left, and another ET-MWP100G should
connect to 6 displays on the right.
3) Each of ET-MWP100G should connect to PC through a router.
4) You can launch two control softwares simultaneously, one for left and the other for right.
5) For the border of left and right system, you need to distribute same input source by using spritter.
32
