Panasonic ET-JPC200BK Page 1 Installation Instructions Manual Download

Page: 1 / 28

DPQX1173ZB/X1

Model No.

ET-JPC200BK

ET-JPC200WK

Installation Instructions

Mount Bracket

Thank you for purchasing this Panasonic product.

■

To customers

This manual is intended for use by installation personnel. Be sure to employ certified personnel to perform the

installation.

After installation, have the installation personnel return this manual to you, and save it for future use.

When moving or removing the projector, give this manual to the certified personnel and have them perform the procedure.

■

To installation personnel

Read the instructions thoroughly and then perform the installation correctly and safely.

Be sure to read through the section entitled “Read this first!” (



pages 3 to 4) before proceeding with the

installation.

After installation, return this manual to the customer.

* Above illustration is shown in combination of this product and optional projector.

ENGLISH

Summary of Contents for ET-JPC200BK





























Search results

Summary of Contents for ET-JPC200BK

Reviews:

Related manuals for ET-JPC200BK

Brands by name

Popular brands

Panasonic ET-JPC200BK, Installation Instructions Manual

Search results

Summary of Contents for ET-JPC200BK

Reviews:

Related manuals for ET-JPC200BK

Brands by name

Popular brands