Resolder.
6. TROUBLESHOOTING GUIDE
(Refer to WIRING CONNECTION DIAGRAM)
< TROUBLE >
< CHECK.>
< REMEDY
Noise is too loud.
Oiling a drop for the outer foil.
Amplitude is too large.
NO
<CHECK TRIMMER DRIVING BARS.>
NO Replace the
trimmer
Check if there is any deformation with trimmer
driving bar A and B.
driving bar.
OK
<CHECK DRIVING HEAD AMPLITUDE.>
NO Replace linear
motor.
Turn the switch ON, and measure the amplitude
using a pin of
NO
drivin head. (See the figure shown below.)
Replace module.
7
