6
English
▼
▼
To remove light dirt
For heavy dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
•
Rinse with water and
shake up and down
several times to remove
the water.
4. Turn the shaver off after
10 ‑ 20 seconds.
5. Remove the outer foil
section and turn the shaver
on.
6. Clean the shaver and the
outer foil section with
running water.
•
Rinse with water and
shake up and down
several times to remove
the water.
▼
▼
7. Wipe off any drops of water with a dry
cloth.
8. Dry the outer foil section and the
shaver completely in a shaded area.
•
The outer foil section will dry faster if
removed from the main body.
9. Attach the outer foil section to the
shaver.
10. Lubricate the shaver.
8
Reading lamps when using
When the battery capacity is low
The battery capacity lamp ( ) blinks when operating the shaver.
•
You can shave 2 to 3 times after the battery capacity lamp ( )
blinks (This will differ depending on usage.)
•
A full charge will supply enough power for approx. 14 shaves of
3 minutes each.
Clean
Cleaning the shaver
1. Remove the shaver from the charging stand.
2. Apply some hand soap and some water to the
outer foil.
•
Close the cleaning shutter.
3. Turn the shaver on.
2
