7
English
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
outer foils.
3. Raise the trimmer and apply a drop
of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off
any excess oil from the outer foils
with a soft cloth.
Cleaning with the brush
Clean the system outer foil, the
shaver body and the trimmer using
the long brush.
Clean the inner blades using the
short brush by moving it in
direction (A).
•
Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
•
Do not use the short brush to
clean the outer foils.
(A)
(B)
Replacing the system outer foil and the inner blades
system outer foil
once every year
inner blades
once every two years
Removing the outer foil section
Press the Foil frame release buttons and lift the
outer foil section upwards.
Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section to the
shaver until it clicks.
►
Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the system
outer foil mark ( ) and securely attach
together.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the
foil frame when attaching to the shaver.