Area Ionizer
ER-X
SERIES
5
All-in-one model equipped with various
functions for optimal removal of charge
Discharge indicator (green)
Lights up during discharge.
CHECK indicator (orange)
Lights up when dirt, wear, etc. of the discharge
needle is detected.
ERROR indicator (red)
Lights up when abnormal discharge is detected.
Discharge frequency setting switch
Select from eight ion generation frequencies ranging from
100 Hz to 1 Hz according to your application.
Head 1 can be used as a charger when the discharge
frequency setting switch for Head 1 is set to “+ Charge” or “-
Charge.”
Notes: 1) Head 2 performs the ordinary charge removal operation.
2) The
ER-X001
cannot use the charging function.
(Discharge operation stops.)
Ion balance setting switch
Adjust the ion balance to any of 15 levels according
to the strength of the charge on the workpieces.
Various setting switch
•
Check level changeover switch
Set the maintenance notification level to
“standard” or “high-sensitivity.”
•
Ion balance control switch
Enable or disable the ion balance auto control function.
•
Indicator changeover switch
Set the level meter indicator display mode to “charge
strength display” or “ion generation volume display.”
•
2 heads control switch
Set the ion generation timing for the two heads to
“synchronize” or “inverse.”
•
Error output changeover switch
Set the error output condition to “generation of
abnormal discharge” or “generation of abnormal
dis discharge stop setting ON.”
Dual head configuration for enhanced charge area and layout expansion
Head 2
Head 1
High-voltage unit
High-voltage unit
Controller
Equipped with charging function
The charging function is useful when charging paper or
parts for static electricity adsorption transport.
Notes: 1) Head 2 performs the ordinary charge neutralizing operation.
2) The
ER-X001
cannot use the charging function.
(Discharge operation stops.)
ER-XC02
CONTROLLER
• Different heads can be combined.
* The new-type controller,
ER-XC02
, allows simultaneous connection of
the bar type head and spot type head.
• Charge removal is possible with a layout that places
heads on either side of the workpiece.
•
The charge removal efficiency can be increased by
synchronizing the two heads.
1
controller
+ 2
heads
Level meter indicator (green)
Discharge control switch
SET UP button
Indicates static buildup around
the head or the amount of ion
generated from the head.
Turn ion generation on and off.
Determine the settings of
discharge frequency and ion
balance.
Discharge control input
Turn ion generation on and off
from an external device.
Alarm output, error output
Report maintenance timing and
malfunctions to an external device.
