background image

4

Area Ionizer 

ER-X

 

SERIES

Carefully designed to prevent 

contamination in manufacturing processes

In consideration of the manufacturing process 

(secondary cells etc.), the 

ER-X

 series heads neither 

use copper nor plate processing. This minimizes the risk 

of contamination with foreign substances.

Discharge needle air barrier design for reduced contamination

A barrier of clean air around the discharge needle keeps 

foreign matter from adhering to it, preventing degraded 

performance. Additionally, by using separate air sources 

for the discharge needle barrier and ion transport, the 

ER-X

 series keeps discharge from becoming unstable 

due to pressure concentration, allowing the device to 

efficiently generate and transport ions.

Air barrier 

structure

Efficient charge 

removal structure

Discharge needle after 

protected by air barrier 

(0.05 MPa) for one month

Flat discharge surface for easy cleaning

The 

ER-X

 series heads have a flat discharge face, 

allowing effortless cleaning of the discharge needles and 

air outlets by simply brushing along the groove provided.

Commercial brush

Groove

Discharge needles

Air outlets

Discharge needle unit for simple needle replacement

The removable discharge needle unit (including a set 

of four needles) substantially simplifies maintenance. 

To remove the unit, just slide it toward both ends as 

indicated by the arrows.

Discharge needle unit

High and low temperature resistant type head also available

ER-X□HC

Bar type head compatible with ambient temperatures of 

-60 to +200 °C 

-76 to +392 °F

 is available.

BAR TYPE HEAD

ER-X008

Effective charge removal width: 

80 mm 

3.150 in

 approx.

ER-X016

Effective charge removal width:

160 mm 

6.299 in

 approx.

ER-X032

Effective charge removal width:

320 mm 

12.598 in

 approx.

ER-X048

Effective charge removal width:

480 mm 

18.898 in

 approx.

ER-X064

Effective charge removal width:

640 mm 

25.197 in

 approx.

Super-compact slim head

By thoroughly redesigning the discharge needle, we 

have created a super-compact slim head that combines 

high-speed charge removal*

1

 with a maintenance-saving 

design*

2

. The 

ER-X

 series can be embedded in, or 

retrofitted onto, equipment that did not provide enough 

space for antistatic measures in the past.

*1: Pulse AC method with built-in air tubes (max. pressure 0.5 MPa)
*2:  Discharge needle air barrier structure, discharge needle unit for 

simple need replacement

360-

degree 

angle 

adjustment

360-

degree 

angle 

adjustment

30 mm

30 mm

(1.181 in)

(1.181 in)

22 mm

22 mm

(0.866 in)

(0.866 in)

Angle adjustment screw

Summary of Contents for ER-X Series





















Reviews: