Panasonic EB-GD93, Service Manual

Page: 15 / 79

OPERATING INSTRUCTIONS
MCUK001002C8 Section 3 Issue 1
Service Manual – 9 – Revision 0
3.9. Public Man Machine Interface (MMI)
3.9.1 General
It is possible to operate all GSM telephones in the same way using the Public MMI. The following operations will work with all
GSM telephones. However, this information is restricted to those operations supported by the GD93 telephone.
The * and # in the following procedures should be replaced by and respectively. Also <SND> and <END> should be
replaced with and keys.
3.9.2 Reading the Phonebook Memory Location
# <MEMORY LOCATION>
Leading zeros can be left out of the location number, e.g. 007 can be 7.
3.9.3 Presentation of IMEI
* # 0 6 #
3.9.4 Security
3.9.5 Call Hold
3.9.6 Call Waiting
Change PIN * * 0 4 * <OLD PIN> * <NEW PIN> * <NEW PIN> #
Change PIN2 * * 0 4 2 * <OLD PIN2> * <NEW PIN2> * <NEW PIN2> #
Unblock PIN * * 0 5 * <PIN UNBLOCKING KEY> * <NEW PIN> * <NEW PIN> #
Unblock PIN2 * * 0 5 * <PIN2 UNBLOCKING KEY> * <NEW PIN2> * <NEW PIN2> #
Place a Call on Hold 2 <SND>
Recall a Held Call 2 <SND>
Make a Second Call <TELEPHONE NUMBER> <SND>
Swap between two Held Calls 2 <SND>
End Held Call 0 <SND>
End Active Call 1 <SND>
Reject Incoming Call 0 <SND>
Enable Call Waiting * 4 3 * <SND>
Disable Call Waiting # 4 3 * <SND>
Call Waiting Status * # 4 3 * # <SND>