24
R
Q
T8
512
Troubleshooting guide
Recording
Unit displays
Television displays
Cannot record to
digital recording
equipment.
(Incorrect sound
recorded.)
≥
You cannot record WMA/MP3.
≥
You cannot record DVDs that have protection preventing
digital recording.
≥
You cannot record DVDs if the recording equipment cannot
handle signals with a sampling frequency of 48 kHz.
≥
Make the following settings:
– Advanced Surround:
Off
(12)
– PCM Digital Output:
Up to 48 kHz
(20)
– Dolby Digital/DTS Digital Surround:
PCM
(20)
“noPLAy”
≥
You inserted a disc the unit cannot play; insert one it can.
(4)
≥
You inserted a blank disc.
≥
You inserted a disc that has not been finalized.
(4)
“U11”
≥
The disc may be dirty.
(25)
“H
∑∑
”or“F7
∑∑
”
(
∑∑
stands for a
number.)
≥
Trouble may have occurred. The number following “H” and
“F7” depends on the status of the unit. Turn the unit off and
then back to ON. Alternatively, turn the unit off, disconnect
the AC power supply cord, and then reconnect it.
≥
If the service numbers fail to clear, note the service number
and contact a qualified service person.
“nodISC”
≥
You haven’t inserted a disc: Insert one.
≥
You haven’t inserted the disc correctly: Insert it correctly.
(9)
“U70-1”
≥
The connected equipment is not HDMI compatible.
“U70-
∑
”
(
∑
stands for a
number.)
The actual number
following “U70-” will
depend on the state
of this unit.
≥
The HDMI connection acts unusually.
– The connected equipment is not HDMI compatible.
– The HDMI cable is too long.
– The HDMI cable is damaged.
“
/
”
≥
The operation is prohibited by the unit or disc.
“Cannot play group
xx, content xx”
“Cannot display
group xx, content
xx”
≥
You are trying to play incompatible group or content.
(5)
“Group xx, content
xx is protected”
≥
You are trying to play protected group or content. You cannot
play it.
“Cannot play audio”
“No audio”
≥
Audio has not been recorded, or recorded in a format this unit
cannot playback. Video playback only is possible.
(5)
“Check the disc”
≥
This disc may be dirty.
(25)
“Due to copyright
protection, audio
cannot be output
from HDMI”
≥
Should you connect equipment that does not support CPPM
(28)
, the audio from the CPPM copy protected DVD-Audio
cannot be output from HDMI AV OUT terminal. Connect the
audio cable of the Audio/Video cable (L, R) to a HDMI
compatible AUDIO IN terminal.
(7)
While “HDMI
Status” displayed,
any items are not
underlined
≥
If you select an item without an “
¢
” in the “Video Output Mode”
in Picture Menu, it will not be underlined.
(17)
“This disc may not
be played in your
region”
≥
You can only play DVD-Video if their region number is “1”,
“ALL” or multiple region numbers including “1”.
(cover)
No on-screen display.
≥
Select “On” in “On-Screen Messages” in “Display” tab.
(20)
T
roub
leshooti
ng guide
RQT8512-P.fm Page 24 Saturday, January 21, 2006 10:17 AM
