Panasonic DP-6000 Operating Instructions Manual Download Page 189

Page: 189 / 270

7-1 Troubleshooting

166

Troubleshooting

Ensure that the document guide on the
DADF touches the edge of the document.

•

Loading documents in the DADF

3-2 Loading Documents

Remove the stickers, clips and cellophane
tapes and copy again.

Are stickers, clips and cellophane tapes
attached to the document?

Symptom

Check

Measure

The scanning of the document
was stopped halfway.

The maximum number of sheets that can
be loaded on the DADF is 50. When 51
sheets or more have to be loaded, divide
them into multiple jobs.

•

Loading documents in the DADF in

3-2 Loading Documents

Did you load 51 sheets of documents or
more on the DADF?

Is the document guide on the DADF in the
right position?

Part of the image is missing on
the copy.

Is the paper damp?

If the paper is damp, either some parts of
the copy are not shown or the copy is
smudged and unclear. Replace it with a
newly opened ream of paper.

•

2-3 Loading Paper

Is the paper folded or wrinkled?

Replace the undesirable paper with paper
from a newly opened ream.

•

2-3 Loading Paper

Open the cover of the DADF to check that
there are no torn paper.

•

7-3 Document Jams

Is part of the document torn and the
pieces of paper still remaining in the
DADF?

Is the document curled?

A corner of the document is

folded.

Load the document again after you have
uncurled the document.

Load documents that can be handled by
the DADF.

•

3-1 Documents

•

3-2 Loading Documents

Document is often jammed.

Is the document non standard, or are
documents such as name cards,
transparencies and thin paper used?

Is the DADF open?

Document is not fed.

Close the DADF.

The minimum size of document that can be
used on the DADF is A5 or 5.5 x 8.5".

•

3-1 Documents

Is the document too small?

Is the right type of document used?

Summary of Contents for DP-6000















































































































































































































































































Search results

Summary of Contents for DP-6000

Reviews:

Related manuals for DP-6000

Brands by name

Popular brands

Panasonic DP-6000, Operating Instructions Manual

Search results

Summary of Contents for DP-6000

Reviews:

Related manuals for DP-6000

Brands by name

Popular brands