T
ro
uble
s
ho
oting
VQT2J62
93
Picture regularly breaks up on some
channels.
¾
Adjust the aerial reception with “Manual Tuning” in the
Setup menu. (
>
75)
Picture very infrequently breaks up on some
or all channels.
¾
Electrical atmospheric interference caused by local or
distant lightning storms or heavy rain with wind in “leafy”
locations may cause pictures to break up and audio to
mute or distort momentarily.
After the Auto-setup, there aren’t any
stations in the station list.
¾
The Auto-setup was started and interrupted.
Do an Auto-setup again.
VIERA Link doesn’t work.
¾
Some functions may not work depending on the version
of “HDAVI Control” of the connected equipment. This unit
supports “HDAVI Control 5” functions.
¾
If the connection for the equipment connected with HDMI
was changed, or if there was a power failure or the plug
was removed from the household mains socket, “HDAVI
Control” may not work.
In this case, change TV (VIERA) setting for “HDAVI
Control” again.
You cannot access this unit from DLNA
compatible equipment on the network.
¾
Check the network connection and the network settings.
(
>
13, 19, 66, 81)
¾
It may not be possible to connect depending on the types
of the equipment or the status of the equipment.
To return all the settings other than the main
ones to the factory preset
¾
Perform “Shipping Condition” or “Default Settings” in the
setup menu. (
>
83)
To reset the ratings level settings
¾
While the disc tray is open, press [DRIVE SELECT] to
select the DVD drive, then press and hold [
¥
REC] and
[
1
] (PLAY/
a
1.3) on the main unit at the same time for 5
or more seconds.
Broadcast
VIERA Link
Network
To reset this unit
DMRXW480&380GL-VQT2J62_eng.book 93 ページ ２０１０年２月１９日 金曜日 午後５時２分
