Recording
TQBS0146
25
Recording
TV programmes
This unit can record two programmes being
broadcasted at the same time.
To record two programmes simultaneously
While recording, perform steps 1–3 (
>
above).
• Channel can only be switched between the recording
programmes.
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On”. (
>
79)
1 Select “Recording Time” or “Continuous
recording” in step 3 (
>
above).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with [
2
,
1
].
2 Press [OK].
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
1 Press [OPTION].
2 Select “Recording Mode”.
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (
>
19)
• The recording mode set here is used as
the default value for the next recording.
To change the recording mode after recording
in DR mode (
>
48, “Picture Quality Change”)
To check to see if the recording mode change
is finished (
>
49)
To cancel the recording mode change (
>
49)
• Programmes in the original picture quality (DR mode) will be
deleted after their recording mode is changed.
• It takes about the same amount of time as recording to
change the recording mode.
• When the HDD does not have enough remaining space, the
recording mode change function does not operate.
• A recording mode change stops when this unit is turned on.
The process will start from the beginning again after the unit
is switched to standby mode.
• Even if you change the recording mode of a programme, its
audio, subtitle settings will remain the same as those at the
start of recording.
Preparation
If you want to change the recording mode (picture
quality) (
>
right)
1
Select the channel to record.
2
Press [REC
¥
].
Recording will start.
3
Select “Automatic Stop”, then press [OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
To set the recording time
Recording
Automatic Stop at XXXXX
REC1/OTR
Recording Time
Continuous recording
30 min
XXXXX - XXXXX
To change the recording mode (picture quality)
HG
HX
HE
HL
HM
XP
SP
LP
DR(Original)
Recording Mode ( Picture Quality )
OK
RETURN
HDD Remain
(DR)
m
h
High
Definition
Standard
Definition
DMR-UBT1GL_eng.book 25 ページ ２０２２年９月２７日 火曜日 午後４時４３分
