12
RQT9046
Setting the Channels and Clock
Preparation:
Turn on the television and select the appropriate video input
to suit the connections to this unit (Example: AV input).
These are the first settings you make upon buying the
unit. You don’t need to make these settings again.
•
•
to turn the unit on.
“HELLO” appears on the unit’s display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable (
➔
11),
it acquires the setting information from the TV. When the
Quick Start Setting screen appears (
➔
14, step 1)
–
•
Language:
e
,
r
to select, then
When the Quick Start Setting screen
appears after this step (
➔
14, step 1)
•
English
Español
Français
Press OK
Pulse OK
Appuyer sur OK
Select Language
Seleccione el idioma
Sélection de langue
TV Aspect Ratio:
e
,
r
to select “4:3 TV” or
“16:9 Widescreen TV”, then
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV
16:9
4:3
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”.
•
•
Quick Start Function:
e
,
r
to select “On” or “Off”,
then
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Automatic Clock and Channel
Settings:
e
,
r
to select “Yes” or “No”,
then
When connecting the cable from the wall
(cable TV or antenna) to the unit’s RF IN:
Select “Yes”.
The unit then displays the source selection
screen (
➔
13).
When not connecting the cable from the wall
(cable TV or antenna) to the unit’s RF IN:
Select “No”.
The unit then displays “Set Clock Manually”
screen (
➔
13, Manual Clock Setting).
•
•
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit’s RF IN.
Yes
No
8
Tips
“Quick Start” function (
➔
49)
If you set Quick Start to on, you can start
recording to DVD-RAM about 1 second
after you press [
^
DVD POWER] to turn
the unit on and then sequentially press
[
*
REC].
The following happens when you have
selected “On”.
Power consumption in standby mode
increases because power is supplied to
the unit.
To return to the previous screen
Press [RETURN].
•
–
DMR-EZ28-P̲PC (RQT9046-P).indb 12
DMR-EZ28-P̲PC (RQT9046-P).indb 12
2007/12/07 15:25:28
2007/12/07 15:25:28
