Panasonic DMR-ES45VP, Service Manual

Page: 51 / 238

[EJECT] [FF] [REW]
10: PLAY passing REV
11: passing REV
12: passing REV LOAD
(Capstan STOP)
13: LOAD DOWN
14: DOWN EJECT
15: EJECT completion
U0: PLAY STOP F
U1: STOP F FF
U2: FF starting up
A0: PLAY STOP F
A1: STOP REW
A2: REW starting up
[PLAY] [REC] [STILL]
20: Cylinder starting up, Phase
drawing 30: Cylinder starting up, Phase
drawing 40:Turning forward
21: Audio muting, VV selection 31: REC signal output 41:Speed is 0, Capstan is OFF
[P.ON] [STILL PLAY] [CUE]
-- Process of turning on power 48: Tape sending 49: x2 speed sending, Turning
point of Calculating remains
[P.OFF] [CUE PLAY] [REV]
70: PLAY P.OFF 4A: Finishing edge Checking,
Tape sending 80: PLAY P.OFF
4-: PLAY Checking, Tape sending 81: Rewinding
P.OFF REV
<Supplementary Data 4> (LM Information)
Result of request of driving Loading Motor.
Display Description
1 There was no change of mechanism position. (Loading Motor was OFF)
2 There was some change of mechanism position. (Loading Motor was ON)
72