Tr
o
ubl
es
hoot
ing
VQT3C14
97
There is a lot of image lag when playing
video.
¾
Set “HD optimizer” in the Picture menu to “Off”. (
>
77)
¾
Set “Audio Delay”. (
>
84)
The images from this unit do not appear on
the TV.
The picture is distorted during play, or video
will not play correctly.
¾
Check the connection and the TV’s input settings.
¾
The unit’s “TV System” setting differs from the TV system
used by the disc now playing. While stopped, keep
pressing [STOP
∫
] and [
<
OPEN/CLOSE] on the main
unit for 5 or more seconds. The system switches from
PAL to NTSC or vice versa. (
>
85)
¾
Picture may not be seen when more than 4 devices are
connected with HDMI cables.
Reduce the number of connected devices.
¾
The picture may be distorted or a black screen may
appear between scenes recorded with different aspect
ratios.
¾
DVD-R DL and +R DL discs have two writable layers on
one side. Video and audio may momentarily cut out when
the unit is switching layers.
¾
Set “Deep Colour Output” (
>
86) or “Contents Type Flag”
(
>
86) to “Off”.
3D video is not output correctly.
¾
Check the settings on this unit and the TV. (
>
43)
¾
When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video is not
output. (
>
16)
¾
When the amplifier/receiver which is connected between
this unit and a TV is off, 3D video is not output. (
>
16)
¾
Discs that have recorded titles with Side by side
(2 screen structure) and that can be enjoyed in 3D are
played back in accordance with the settings of the TV.
¾
When “HDMI Audio Output” is set to “Off”, 3D video may
not be output correctly. (
>
86)
TV reception is not displayed.
¾
Broadcast signals are output from this unit’s RF OUT
terminal. Select “On” in “RF OUT ( Aerial Signal )”.
(
>
89)
No sound.
Distorted sound.
¾
Check the connections or amplifier’s settings. (
>
12, 16)
¾
Press [AUDIO] to select the audio. (
>
25, 42)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On”. (
>
86)
Cannot switch audio.
¾
You cannot switch the audio if “Digital Audio Output” is
set to “Bitstream” (
>
84)
The remote control doesn’t work.
¾
The remote control and main unit are using different
codes. Change the code on the remote control.
¾
Software (firmware) is updating when “UPD
/
” is
displaying on the unit’s display. Wait until the update is
completed. (
>
92)
¾
The HOLD function is activated. (
>
18)
The unit is on but cannot be operated.
¾
Drive has not been selected properly.
Cannot tune channels.
¾
Check the connections.
“Download from TV” function does not work.
¾
You must connect to a VIERA Link (HDAVI Control 3 or
later) compatible TV with a HDMI cable to download
channel presets. (
>
12)
Startup is slow.
¾
Startup takes time in the following situations:
– A disc is inserted.
– The clock is not set.
– Immediately after a power failure or the AC mains lead
is connected.
– When the unit is connected with an HDMI cable.
– When the BD-J (
>
115) application is executing.
– When the “Power Save in Standby” is activated. (
>
89)
Sound
Operation
Press and hold [OK] and the
indicated number button at the
same time for more than
5 seconds. (
>
89)
Unit’s display
DMRBWT800&700GL_eng.book 97 ページ ２０１１年２月１４日 月曜日 午後３時５０分
