G
et
ti
n
g
st
art
e
d
VQT3C14
21
After completing “Easy Setting”, you can continue with
“Network Easy Setting”.
Select “Wired” or “Wireless”, then press
[OK].
Follow the on-screen instructions and make
the following settings.
≥
Network Easy Setting ( Home Network Connection
Check )
≥
Home Network ( DLNA ) Server function
≥
Network Easy Setting ( Internet Connection Test )
This screen appears, Setup is complete.
Press [OK].
¾
When you experience problems with settings (
>
22)
≥
Before beginning wireless connection setup
≥
Obtain your Network name (SSID
§
1
).
≥
If your wireless connection is encrypted please be sure
that you know your encryption key.
Select “Search for wireless network” or
“WPS (PUSH button)” and then follow the
on-screen instructions and make the
settings.
∫
Search for wireless network:
≥
When you select “Search for wireless network”, the
available wireless networks will be displayed. Select your
network name and press [OK].
– If your Network name is not displayed search again by
pressing the “Red” button on the remote control.
– Stealth SSID will not be displayed when you select
“Search for Network”. Enter Manually by using “Wireless
Settings”. (
>
87)
≥
If your wireless network is encrypted, Encryption Key Input
Screen will be displayed.
Input the encryption key of your network.
∫
WPS (PUSH button):
If your Wireless router supports WPS
(PUSH button), you can easily
perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a
standard that facilitates settings
relating to the connection and
security of wireless LAN devices.
1
Press WPS button or
corresponding button of Wireless
router until the lamp starts flashing.
≥
For details, refer to the operating instruction of Wireless
router.
2
Press [OK].
§
1
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
§
2
Wi-Fi Protected Setup-compatible Wireless router may
have the mark.
Network Easy Setting
“Wired” connection
OK
RETURN
Network Easy Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Select “Wireless”.
Current setting : Wired
Wired
Wireless
OK
RETURN
Network Easy Setting
Network Easy Setting have been finished.
Press OK.
“Wireless” connection
OK
RETURN
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
2
e.g.,
DMRBWT800&700GL_eng.book 21 ページ ２０１１年２月１４日 月曜日 午後３時５０分
