35
9.1.8.
Power P.C.B.
1. Remove the connector (A) and Screw (B) to remove the
INTERNAL WIRELESS MODULE.
2. Remove the connector (C) and 3 Screws (B) to remove
the Power P.C.B..
9.1.9.
Digital P.C.B.
1. Remove the 2 Screws (A) to remove Digital P.C.B..
9.2.
BD Drive
9.2.1.
Tray
1. Insert the Paper clips, etc. into the hole of the bottom
side, and slide it to the direction of arrow until it can be.
2. Pull the Tray to the direction of arrow until it can be.
3. Push the two posts in front of the mecha chassis to both
sides of the drive to unlock the tray, and push it outward
simultaneously.
Summary of Contents for DMP-BDT220GA
