Panasonic DMP-BDT220GA, Service Manual

Page: 34 / 99

34
9.1.4.5. How to assemble Door ass'y.
1. Lean the right side of the door shaft against the side of
relevant holes of the front panel, and insert the door shaft
into the hole of the front panel.
2. Move the door leftward, and insert the 4 shafts of the front
panel into the shaft hole of the door.
3. Firstly attach the door spring to the front panel.
4. Stick the spring to the door with the door closed.
9.1.5. Rear Panel
1. Remove the 4 Screws (A) and Screw (B).
2. Unlock 2 locking Tabs (C) to remove the Rear Panel.
9.1.6. SD_USB P.C.B.
1. Remove the connector (A).
2. Remove the 2 Screws (B).
9.1.7. BD Drive
1. Remove the OPU FFC.
2. Remove the 3 FFCs.
3. Remove the 2 Screws (A ), remove 2 tabs of BD Drive in
the direction of the arrow, to remove BD Drive.