background image

SQT0754

F1214WY0

Thank you for purchasing this product.
Please read these instructions carefully before using 
this product, and save this manual for future use.

A more detailed operating instruction is available 
in “Operating Instructions (PDF format)”. To read 
it, download it from the website.
http://av.jpn.support.panasonic.com/support/
global/cs/bd/oi/index.html

You will need Adobe Reader to browse or print the 
Operating Instructions (PDF format).
You can download and install a version of Adobe 
Reader that you can use with your OS from the 
following website. (As of December 2014)
http://www.adobe.com/products/acrobat/
readstep2.html

When other Panasonic devices respond to the remote 
control of the unit, change the remote control code.

1

Turn the unit on and off

2

TV operation buttons
You can operate the Panasonic TV using this 
unit’s remote control. Some buttons may not work 
depending on the TV.
[

Í

TV] : Turn the TV on and off

[AV] : Change input
[

i j

VOL] : Adjust the volume

3

Select title numbers, etc./Enter numbers or 

[BDT271/270]

 

[BDT175/174/171/170]

 characters

4

Cancel

5

Change soundtrack

6

Basic playback control buttons

7

Show Pop-up menu

8

Show Top menu

9

Show Option menu

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the 
display

11 Transmit the remote control signal
12 Open or close the disc tray
13 Show the status messages
14

[BDT271/270]

Show Miracast

TM

 screen

 

[BDT175/174/171/170]

 

[BDT166/165]

 

[BD833/83]

Switch Secondary Video on/off (Picture-in-picture)

15 Show the Home Screen of the Network Service

16 Exit the Menu screen

17 Show Netflix screen

18 Show HOME menu
19 [

3

,

4

,

2

,

1

] : Move the highlight for selection

[OK] : Confirm the selection

(

;1

) : Frame-by-frame

20 Return to previous screen

1

Disc tray

2

USB port

3

POWER LED

The LED lights up when the unit is turned on, and 

flashes when error occurs.

4

Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20

e

 up and down, 30

e

 left and right

5

Open or close the disc tray

6

[BDT271/270]

 

[BDT175/174/171/170]

Stop

7

[BDT271/270]

 

[BDT175/174/171/170]

Start play

8

Standby/on switch (

Í

/I

)

Press to switch the unit from on to standby mode 

or vice versa. In standby mode, the unit is still 

consuming a small amount of power.

Basic Operating Instructions

Blu-ray Disc

TM

 Player

Model No. DMP-BDT271

DMP-BDT270
DMP-BDT175
DMP-BDT174
DMP-BDT171
DMP-BDT170
DMP-BDT166
DMP-BDT165

DMP-BD833

DMP-BD83

Firmware updates

Panasonic is constantly improving the unit’s firmware 
to ensure that our customers are enjoying the latest 
technology.
Panasonic recommends updating your firmware as 
soon as you are notified.

EG

Unless otherwise indicated, illustrations in these 
operating instructions are of DMP-BDT271.

Accessories

Check the supplied accessories before using this unit.

1

Remote control

[BDT271/270]

(N2QAYB001031)

[BDT175/174/171/170]

(N2QAYB001030)

[BDT166/165]

 

[BD833/83]

(N2QAYB001029)

2

Batteries for remote control

[BDT271/270]

 

[BDT175/174/171/170]

1

AC mains lead

[BDT166/165]

 

[BD833/83]

1

AC adaptor

 

Product numbers are provided in these operating instructions 
correct as of December 2014. These may be subject to change.

Do not use AC mains lead and AC adaptor with other 
equipment.

Do not use any other AC mains lead and AC adaptors except 
the supplied one.

Using the remote control

– Insert the batteries to the terminal so that it (

i

 and 

j

matches those in the remote control.

R6/LR6, AA

(Alkaline or manganese 
batteries)

Control reference guide

1

2

3

6

4
5

7

8

19

10

9

20

18

16

15

17

14

13

12

11

abc

jkl

mno

pqrs

tuv

wxyz

ㄅㄆㄇ

ㄈㄉㄊ

[BDT175/174/171/170]
[BDT166/165]
[BD833/83]

1

2

3 4

1

2

3

4

8

7

5

6

8

5

[BDT271/270]
[BDT175/174/171/170]

[BDT166/165]

 

[BD833/83]

This unit consumes a small amount of AC power (

>

 

“Specifications”) even when turned off in standby mode. 

For the purpose of energy conservation, the unit should be disconnected if you will not be using it for 

extended period of time.

[BDT166/165]

 

[BD833/83]

 

The unit is in the standby condition when the AC adaptor is connected. The primary circuit 

is always “live” as long as the AC adaptor is connected to an electrical outlet.

The following functions may not work depending on the media and contents.

BD-Video: 

Video

BD-RE:

 Video, JPEG, MPO*, AAC, ALAC, DSD*, 

FLAC, MP3, WAV, WMA

BD-R: 

Video, MKV, Xvid, AAC, ALAC, DSD*, FLAC, 

MP3, WAV, WMA

DVD-Video:

 Video

DVD-R/DVD-R DL : 

Video, AVCHD, MKV, Xvid, 

JPEG, MPO*, AAC, ALAC, DSD*, FLAC, MP3, WAV, 

WMA

DVD-RW/+R/+RW/+R DL : 

Video, AVCHD

Music CD : 

Music [CD-DA]

CD-R/CD-RW : 

MKV, Xvid, JPEG, MPO*, AAC, 

ALAC, FLAC, MP3, Music [CD-DA], WAV, WMA

USB devices (up to 4 TB) : 

MKV, MP4, MPEG2, 

Xvid, JPEG, MPO*, AAC, ALAC, DSD*, FLAC, MP3, 

WAV, WMA

Region management information

The unit can play back BD-Video/DVD-Video discs of 
the following regions codes, including “

ALL

”:

*

[BDT271/270] [BDT175/174/171/170]

 

[BDT166/165]

 only

Quick Start Guide

STEP 1 :  Connecting to a TV

HDMI IN

To a household mains socket

HDMI cable

AC mains lead (supplied)

[BDT271/270]
[BDT175/174/171/170]

[BDT166/165]
[BD833/83]

AC adaptor (supplied)

[BDT271/270]
[BDT175/174/171/170]

[BDT166/165]

 

[BD833/83]

STEP 2 :  Connecting to the network

[BDT271/270]

Wireless LAN connection

Wireless router, etc.

Internet

LAN cable connection

Broadband router, etc.

Internet

LAN Cable

[BDT271/270]
[BDT175/174/171/170]

[BDT166/165]

 

[BD833/83]

Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

STEP 3 :  Settings

Turn on the TV and select the appropriate video 
input.

Press [

Í

/I].

Follow the on-screen instructions to continue with 
the settings.

2

1

HDMI

HDMI

TV

STEP 4 :  Playback

Insert the media.

Press [OK] or [

3

,

4

,

2

,

1

] to select the item.

If there are any other items, repeat this step.

1

2

Operations during playback

Stop

Press [

STOP].

The stopping point is memorized.

Resume play function

Press [

1

PLAY] to restart from this point.

The point is cleared if the media is removed.

Pause

Press [

;

PAUSE].

Press [

;

PAUSE] again or [

1

PLAY] to restart play.

Search

While playing, press [SEARCH

6

or [SEARCH

5

].

The speed increases up to 5 steps.

Press [

1

PLAY] to revert to normal playback speed.

Slow motion

While paused, press [SEARCH

5

].

Skip

While playing or paused, press 
[

:

] or [

9

].

Skip to the title, chapter or track.

Playable media

BD-Video

DVD-Video

2

Example:

Specifications are subject to change without notice.

Unit

To reduce the risk of fire, electric shock or product damage,

Do not expose this unit to rain, moisture, dripping or splashing.

Do not place objects filled with liquids, such as vases, on this unit.

Use only the recommended accessories.

Do not remove covers.

Do not repair this unit by yourself. Refer servicing to qualified service 

personnel.

Do not let metal objects fall inside this unit.

Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

Ensure that the power supply voltage corresponds to the voltage 

printed on this unit.

Insert the mains plug fully into the socket outlet.

Do not pull, bend, or place heavy items on the lead.

Do not handle the plug with wet hands.

Hold onto the mains plug body when disconnecting the plug.

Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket 

outlet immediately.

Unit

This unit utilizes a laser. Use of controls or adjustments or 

performance of procedures other than those specified herein may 

result in hazardous radiation exposure.

Do not place sources of naked flames, such as lighted candles, on 

this unit.

This unit may receive radio interference caused by mobile telephones 

during use. If such interference occurs, please increase separation 

between this unit and the mobile telephone.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

Do not install or place this unit in a bookcase, built-in cabinet or in 

another confined space. Ensure this unit is well ventilated.

Do not obstruct this unit’s ventilation openings with newspapers, 

tablecloths, curtains, and similar items.

Do not place the unit on amplifiers/receivers or equipment that may 

become hot. The heat can damage the unit.

Do not expose this unit to direct sunlight, high temperatures, high 

humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a 

fire.

Danger of explosion if battery is incorrectly replaced. Replace only 

with the type recommended by the manufacturer.

When disposing of the batteries, please contact your local authorities 

or dealer and ask for the correct method of disposal.

Do not mix old and new batteries or different types at the same time.

Do not heat or expose to flame.

Do not leave the battery(ies) in a car exposed to direct sunlight for a 

long period of time with doors and windows closed.

Do not take apart or short circuit.

Do not recharge alkaline or manganese batteries.

Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for a 

long period of time. Store in a cool, dark place.

[BDT166/165]

 

[BD833/83]

AC adaptor

The AC adaptor operates on AC between 110 V and 240 V.

But obtain a suitable plug adaptor if the plug does not fit the

AC mains socket.

The following limits are in place regarding the usage of this unit. You 

must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage 

which may arise due to a failure to obey these limits, or to any condition 

of use or disuse of this unit.

Data transmitted and received over radio waves may be 

intercepted and monitored.

This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow 

the following points:

– Do not expose this unit to high temperatures or direct sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

The operation history may be recorded in the memory of this unit.

Disposal of Old Equipment and Batteries
Only for European Union and countries with 
recycling systems

These symbols on the products, packaging, and/or 

accompanying documents mean that used electrical and 

electronic products and batteries must not be mixed with 

general household waste.

For proper treatment, recovery and recycling of old products 

and used batteries, please take them to applicable 

collection points in accordance with your national 

legislation.

By disposing of them correctly, you will help to save 

valuable resources and prevent any potential negative 

effects on human health and the environment.

For more information about collection and recycling, please 

contact your local municipality.

Penalties may be applicable for incorrect disposal of this 

waste, in accordance with national legislation.

Note for the battery symbol (bottom 
symbol):

This symbol might be used in combination with a chemical 

symbol. In this case it complies with the requirement set by 

the Directive for the chemical involved.

NORSK

Produkt

For å redusere faren for brann, elektrisk støt eller skade på apparatet:

Utsett ikke produktet for regn, fukt, drypping eller sprut.

Ikke plasser objekter som er fylt med væske, som vaser, på 

apparatet.

Bruk kun anbefalt tilbehør.

Fjern ikke deksler.

Reparer ikke denne enheten selv, overlat service til kvalifisert 

servicepersonell.

Vekselstrømnett

Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan trekkes fra 

stikkontakten.

Produkt

Dette produktet anvender en laser. Betjening av kontroller eller 

justering eller andre inngrep enn de beskrevet i denne 

bruksanvisning kan føre til farlig bestråling.

Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

Dette apparatet er beregnet for bruk under moderate klimaforhold.

Plassering

For å redusere faren for brann, elektrisk støt eller skade på apparatet:

Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et 

annet lukket sted. Pass på at produktet er godt ventilert.

Apparatets ventilasjonsåpninger må ikke dekkes til med aviser, 

duker, gardiner eller lignende.

Firmware updates

Occasionally, Panasonic may release updated 

firmware for this unit that may add or improve the 

way a feature operates. These updates are 

available free of charge.
This unit is capable of checking the firmware 

automatically when connected to the Internet via a 

broadband connection.

When a new firmware version is available, the 

following message is displayed.

You can also download the latest firmware from the 

following website and store it to a USB device to 

update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

DO NOT DISCONNECT the unit from the AC 
power or perform any operation while the update 
takes place.
After the firmware is installed, unit will restart and 
the following screen will be displayed.

e.g.,

 

To show the firmware version on this unit;

[HOME] 

>

 “Setup” 

>

 “Player Settings” 

>

 “System” 

>

 

“System Information” 

>

 “Firmware Version Information”

Downloading will require several minutes. It may take 

longer or may not work properly depending on the 

connection environment.

If you do not want to check for the latest firmware version, 

set “Automatic Update Check” to “Off”. 

[HOME] 

>

 “Setup” 

>

 “Player Settings” 

>

 “System” 

>

 

“Firmware Update”

Firmware Update

Current Version:   X.XX

New Version:        X.XX

Do you want to start firmware update?
For the update information, please visit the 
following website:
http://panasonic.jp/support/global/cs/

Yes

No

OK

RETURN

The firmware was updated.

Current Version

x.xx

RETURN

Specifications

Power supply

[BDT271/270]

 

[BDT175/174/171/170]

AC 220 V to 240 V, 50 Hz

[BDT166/165]

 

[BD833/83]

DC 12 V 0.8 A (DC IN terminal)

Power consumption

[BDT271/270]

 

[BDT175/174/171/170]

Approx. 13 W

[BDT166/165]

 

[BD833/83]

Approx. 11 W

Power consumption 
in standby mode

Approx. 0.5 W

(Quick Start: Off)

Power consumption 
in Network standby 
mode

[BDT271/270]

 

[BDT175/174/171/170]

Approx. 5.5 W

[BDT166/165]

 

[BD833/83]

Approx. 3.5 W

(Quick Start: On)

Dimensions 
(W

k

H

k

D)

[BDT271/270]

 

[BDT175/174/171/170]

312 mm

k

43 mm

k

180 mm

[BDT166/165]

 

[BD833/83]

245 mm

k

38.5 mm

k

175 mm

Mass

[BDT271/270]

 

[BDT175/174/171/170]

Approx. 1.0 k

g

[BDT166/165]

 

[BD833/83]

Approx. 0.8 k

g

Precautions

WARNING

CAUTION

This unit is intended for use in moderate climates.

[BDT271/270]

Wireless LAN connection

Declaration of Conformity (DoC)

Hereby, “

Panasonic Corporation

” 

declares that this product is in 

compliance with the essential 

requirements and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our R&TTE 

products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre, 

Winsbergring 15, 22525 Hamburg, Germany

This product is intended for general consumer. (Category 3)

This product on purpose to connect to access point of 2.4 GHz WLAN.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you 

discard this unit either by disposal or transfer, then follow the procedure 

to return all the settings to the factory presets to delete the user 

settings.

1

Turn the unit on.

2

Press and hold [OK], the yellow button and the blue button on the 
remote control at the same time for more than 5 seconds.
– POWER LED starts to flash, and “00 RET” is displayed on the 

screen.

3

Press [

1

] (right) repeatedly on the remote control until “08 FIN” is 

displayed on the screen.

4

Press and hold [OK] for more than 5 seconds.

ADVARSEL

FORSIKTIG

LASER-spesifikasjon

Klasse 1 LASER-produkt:

Bølgelengde :

790 nm (CD)/660 nm (DVD)/405 nm (BD)

Laserstyrke :

 Ingen farlig stråling sendes ut

Copyrights and Trademarks

This product uses Cinavia technology to limit the use of unauthorized 

copies of some commercially-produced film and videos and their 

soundtracks. For details, refer to the operating instructions (PDF 

format).

“AVCHD” is a trademark of Panasonic Corporation and Sony 

Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under 

license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS 

and the Symbol together are registered trademarks, and DTS-HD 

Master Audio is a trademark of DTS, Inc. © DTS, Inc. All Rights 

Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are 

trademarks or registered trademarks of HDMI Licensing LLC in the 

United States and other countries.

This product is licensed under the AVC patent portfolio license and VC-1 

patent portfolio license for the personal and non-commercial use of a 

consumer to (i) encode video in compliance with the AVC Standard and 

VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video 

that was encoded by a consumer engaged in a personal and non-

commercial activity and/or was obtained from a video provider licensed 

to provide AVC/VC-1 Video. No license is granted or shall be implied for 

any other use. Additional information may be obtained from MPEG LA, 

LLC.

See http://www.mpegla.com.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS 

and Thomson.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

The Wi-Fi CERTIFIED

TM

 Logo is a certification mark of the Wi-Fi Alliance

®

.

The Wi-Fi Protected Setup

TM

 Identifier mark is a certification mark of 

Wi-Fi Alliance

®

.

“Wi-Fi

®

” and “Wi-Fi Direct

®

” are registered trademarks of Wi-Fi 

Alliance

®

.

 “Wi-Fi Protected Setup

TM

”, “Miracast

TM

”, “WPA

TM

”, and “WPA2

TM

” are 

trademarks of Wi-Fi Alliance

®

.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service 

marks, or certification marks of the Digital Living Network Alliance.

Windows is a trademark or a registered trademark of Microsoft 

Corporation in the United States and other countries.

Android is a trademark of Google Inc.

Copyright 2004-2014 Verance Corporation. Cinavia

TM

 is a Verance 

Corporation trademark. Protected by U.S. Patent 7,369,677 and 

worldwide patents issued and pending under license from Verance 

Corporation. All rights reserved.

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation,

(3) the software licensed under the GNU General Public License, 

Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public 

License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under the 

GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope that it 

will be useful, but WITHOUT ANY WARRANTY, without even the 

implied warranty of MERCHANTABILITY or FITNESS FOR A 

PARTICULAR PURPOSE. Please refer to the detailed terms and 

conditions thereof shown in the Player Settings menu.
At least three (3) years from delivery of this product, Panasonic will give 

to any third party who contacts us at the contact information provided 

below, for a charge no more than our cost of physically performing 

source code distribution, a complete machine-readable copy of the 

corresponding source code covered under GPL V2.0, LGPL V2.1 or the 

other licenses with the obligation to do so, as well as the respective 

copyright notice thereof.

Contact Information: [email protected]

The source code and the copyright notice are also available for free in 

our website below.

http://panasonic.net/avc/oss/

David M. Gay’s dtoa and strtod license
The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
Permission to use, copy, modify, and distribute this software for any 

purpose without fee is hereby granted, provided that this entire notice is 

included in all copies of any software which is or includes a copy or 

modification of this software and in all copies of the supporting 

documentation for such software.
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY 

EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE 

AUTHOR NOR LUCENT MAKES ANY REPRESENTATION OR 

WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF 

THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND 

SOFTWARE
Unicode Data Files include all data files under the directories 

http://www.unicode.org/Public/, http://www.unicode.org/reports/, 

and http://www.unicode.org/cldr/data/. 

Unicode Software includes any source code published in the Unicode 

Standard or under the directories 

http://www.unicode.org/Public/, 

http://www.unicode.org/reports/, and 

http://www.unicode.org/cldr/data/.
NOTICE TO USER: Carefully read the following legal agreement. BY 

DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING 

UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR 

SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY ACCEPT, 

AND AGREE TO BE BOUND BY, ALL OF THE TERMS AND 

CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO 

NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE OR USE THE 

DATA FILES OR SOFTWARE. 
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1991-2009 Unicode, Inc. All rights reserved. Distributed 

under the Terms of Use in 

http://www.unicode.org/copyright.html.

Permission is hereby granted, free of charge, to any person obtaining a 

copy of the Unicode data files and any associated documentation (the 

““Data Files””) or Unicode software and any associated documentation 

(the ““Software””) to deal in the Data Files or Software without 

restriction, including without limitation the rights to use, copy, modify, 

merge, publish, distribute, and/or sell copies of the Data Files or 

Software, and to permit persons to whom the Data Files or Software are 

furnished to do so, provided that (a) the above copyright notice(s) and 

this permission notice appear with all copies of the Data Files or 

Software, (b) both the above copyright notice(s) and this permission 

notice appear in associated documentation, and (c) there is clear notice 

in each modified Data File or in the Software as well as in the 

documentation associated with the Data File(s) or Software that the 

data or software has been modified.
THE DATA FILES AND SOFTWARE ARE PROVIDED ““AS IS””, 

WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 

NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT 

SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN 

THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL 

INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 

PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE 

OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 

CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA 

FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall 

not be used in advertising or otherwise to promote the sale, use or other 

dealings in these Data Files or Software without prior written 

authorization of the copyright holder.”

(1) MS/WMA

This product is protected by certain intellectual property rights of 

Microsoft Corporation and third parties. Use or distribution of such 

technology outside of this product is prohibited without a license from 

Microsoft or an authorized Microsoft subsidiary and third parties.
(2) MS/PlayReady/Final Product Labeling

This product contains technology subject to certain intellectual property 

rights of Microsoft. Use or distribution of this technology outside of this 

product is prohibited without the appropriate license(s) from Microsoft.
(3) MS/PlayReady/End User Notices

Content owners use Microsoft PlayReady™ content access technology 

to protect their intellectual property, including copyrighted content. This 

device uses PlayReady technology to access PlayReady-protected 

content and/or WMDRM-protected content. If the device fails to 

properly enforce restrictions on content usage, content owners may 

require Microsoft to revoke the device’s ability to consume PlayReady-

protected content. Revocation should not affect unprotected content or 

content protected by other content access technologies. Content 

owners may require you to upgrade PlayReady to access their content. 

If you decline an upgrade, you will not be able to access content that 

requires the upgrade.
(4) FLAC, WPA Supplicant

The software licenses are displayed when “Software Licence” in the 

Setup menu is selected.*
* [HOME] 

>

 “Setup” 

>

 “Player Settings” 

>

 “System” 

>

 “System 

Information”

(Inside of product)
(Produktets innside)

[BDT271/270]
[BDT175/174/171/170]

[BDT166/165]

 

[BD833/83]

EU

Manufactured by:

Importer for Europe:

Panasonic Corporation
Kadoma, Osaka, Japan
Panasonic Marketing Europe GmbH 
Panasonic Testing Centre 

 

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Corporation

Web Site: 

http://panasonic.net

C

 Panasonic Corporation 2014

p

English

Svenska

until 

2014/12/31

SQT0754~basic_mst.fm  1 ページ  2014年12月11日 木曜日 午後3時46分

Reviews: