Panasonic DMCFZ2 - DIGITAL STILL CAMERA Operating Instructions Manual Download

Page: 20 / 112

Preparation

Temporarily storing the lens hood

You can store the lens hood in the camera
temporarily. Please do not take a picture with
the lens hood stored.

[Preparation]
• Check that the power switch is set to [OFF]

and the lens barrel is retracted.

• Close the flash. (P37)

Remove the lens hood.

Reverse the lens hood and attach it.

• Attach the lens hood adjusting the

mark

of the lens hood adaptor to the

mark of the lens hood, and rotate the
lens hood to the right.

Attach the lens cap.

• It is recommended that the lens hood be

removed when using the flash. Vignetting
can occur, causing the lower portion of the
photo to be dark.

• The lens cap can be installed while the lens

hood is in use if the lens cap string is not
used.

FZ2-PP.book 20 ページ２００３年９月２６日　金曜日　午後１２時１分

Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA

















































































































Search results

Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFZ2 - DIGITAL STILL CAMERA

Brands by name

Popular brands

Panasonic DMCFZ2 - DIGITAL STILL CAMERA, Operating Instructions Manual

Search results

Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFZ2 - DIGITAL STILL CAMERA

Brands by name

Popular brands