Panasonic DMCFZ2 - DIGITAL STILL CAMERA Operating Instructions Manual Download

Page: 15 / 112

Preparation

Inserting the Card

[Preparation]
• Check that the power switch is set to [OFF]

and the lens is retracted.

• Close the flash. (P37)

[Inserting the card]

Slide the lever in the direction of the
arrow to open the Memory Card/
battery door.

Insert the card with the label facing
the front of the camera.

• Insert the card, pressing gently until it

locks in place. If the card will not insert
freely, it may be reversed. Do not force
the card.

• Do not touch the connection terminals

on the back side of the card.

Close the Memory Card/battery door.

[Removing the card]

Open the Memory Card/battery door.

Press the card to release.

Pull the card out.

Close the Memory Card/battery door.

• If the Memory Card/battery door cannot be

completely closed, take the card out and
insert it again.

• If the card cannot be fully inserted, verify

whether the direction of the card is correct.

• We recommend that you use a Panasonic

branded SD Memory Card. (Use only the
genuine card)

• If the card is not fully inserted, the card may

be damaged.

OPEN

FZ2-PP.book 15 ページ２００３年９月２６日　金曜日　午後１２時１分

Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA

















































































































Search results

Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFZ2 - DIGITAL STILL CAMERA

Brands by name

Popular brands

Panasonic DMCFZ2 - DIGITAL STILL CAMERA, Operating Instructions Manual

Search results

Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFZ2 - DIGITAL STILL CAMERA

Brands by name

Popular brands