Technical use
88
Connecting to a PC
[Preparation]
• If your PC uses Microsoft Windows
®
98 or 98SE, a USB driver must be installed
from the CD that is included. If you are using a newer Microsoft operating system
such as Windows Me, Windows 2000, or Windows XP (Home Edition/
Professional), no USB driver needs to be installed. Your PC should recognize the
camera automatically.
1
Insert the Memory Card into the camera, and turn the power switch to
[ON].
2
Connect the camera to a PC via the supplied USB
connection cable
1
.
[Windows]
The drive is shown on the [My Computer] folder.
• If it is the first time you are connecting the camera to a PC, the required driver
is installed automatically so that the camera can be recognized by the
Windows Plug and Play, then it is shown on the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
• When connecting to a PC, we recommend using the AC adaptor as the power
source. (P14)
• If the remaining battery power becomes low during communication, the power
indicator blinks and the alarm beeps. In this case, stop the communication. Then
turn the power switch to [OFF] and charge the battery.
• When connecting to a PC, pictures and sounds are not output from the A/V OUT
socket.
• For further information (software installation), read the supplied operating
instructions for PC connection.
A/V
OUT
USB
ACCESS
FZ2-PP.book 88 ページ ２００３年９月２６日 金曜日 午後１２時１分
Summary of Contents for DMCFZ2 - DIGITAL STILL CAMERA
Page 111: ...111 Memo ...
