50
VQT3H43
VQT3H43
51
This mode of recording lets you set any aperture value and shutter speed when exposure
adjustment prevents you from recording at the desired exposure (brightness/darkness).
Also, long-exposure recording of up to 60 seconds is possible.
Set to
([Manual Exposure] Mode)
• Manual exposure assist is displayed.
Determine aperture and shutter
speed
◄►
: Adjust aperture value
▲▼
: Adjust shutter speed
• When the picture is too bright
or too dark or there is incorrect
exposure, the numbers for the
aperture value and shutter speed
are shown in red.
• If the shutter is pressed halfway,
manual exposure assist is
displayed.
Aperture value/shutter speed
■
Manual exposure assist (estimate)
Shows pictures with standard brightness.
Shows brighter pictures. For standard brightness, either use a faster
shutter speed or increase aperture value.
Shows darker pictures. For standard brightness, either use a slower
shutter speed or reduce aperture value.
●
LCD monitor brightness may vary from the actual still picture recorded.
Determine aperture and shutter speed and record
[Manual Exposure] Mode
Recording Mode:
Registering your preferred Recording Mode, [Rec] menu settings, etc. to [Cust.Set Mem.]
and setting the mode dial to
allows you to switch quickly to those settings.
[Cust.Set Mem.] Registering your own settings
Up to 3 current camera settings can be registered.
■
Recording Mode:
Select the Recording Mode
you wish to register and
set the [Rec] menu, [Setup]
menu, etc.
Select [Cust.Set Mem.] from
the [Setup] menu (
→
20)
Select the custom set to
register
Select [Yes]
●
Self-timer is not stored in custom set.
●
The following [Setup] menus are stored in custom set.
• [Guide Line] • [Histogram] • [Zoom Resume] • [Auto Review]
Register your own settings and record
[Custom] Mode
Recording Mode:
