background image

40   

VQT3H43

VQT3H43

   41

 Taking pictures with flash

Recording Mode:    

 

 

 

 

 

 

Display [Flash]

Select the desired type

Type, operations

Uses

[Auto]

 

• Automatically judges whether or not to flash

Normal use

[Auto/Red-Eye]

1

 

• Automatically judges whether or not to flash 

(reduce red-eye)

Taking pictures of subjects in dark 

places

[Forced Flash On]

 

• Always flash

Taking pictures with backlight or 

under bright lighting (e.g. fluorescent)

[Forced On/Red-Eye]

1

 

• Always flash (reduce red-eye)

[Slow Sync./Red-Eye]

1

 

• Automatically judges whether or not to flash 

(reduce red-eye; slow shutter speed to take 

brighter pictures)

Taking pictures of subjects against a 

nightscape (tripod recommended)

[Forced Flash Off]

 

• Never flash

Places where flash use is prohibited

1

  Two flashes will be emitted. Do not move until after the second flash. Interval between flashes varies 

according to brightness of subject.

If [Red-Eye Removal] on the [Rec] menu is [ON], the 

 appears with the flash icon, red-eye 

is automatically detected and still picture data is corrected. (Only when [AF Mode] is 

 (Face 

Detection))

 

 Available types in each mode 

(

: Available, –: Not available, 

: Default setting)

 

 

 

 

 

 

 

2

2  

Set to 

 or 

 depending on the subject and brightness.

 

• The flash cannot be used when recording motion pictures, Scene Modes 

 or 

 

The available flash range when [Sensitivity] setting is [AUTO]

W side (Max.)

Approx. 60 cm (1.97 feet) - 5.0 m (16.4 feet)

T side (Max.)

Approx. 1.0 m (3.28 feet) - 2.8 m (9.18 feet)

 

 

Shutter speeds are as follows:

 

 : 1/60

3

 - 1/4000th

 

,   : 1

3,

4

 - 1/4000th

Varies according to [Min. Shtr Speed] setting. 

4  

When [Min. Shtr Speed] is set to [AUTO], and a jitter is detected when [Stabilizer] is 
turned to [

ON

], the maximum speed is 1/4 second. Also varies according to [Intelligent 

Auto] Mode, [Scene Mode], zoom position.

 

The effect of Red-Eye Reduction varies depending on the subject and is affected by 
factors such as distance to the subject, whether the subject is looking at the camera 
during preliminary flash, and so on. In some cases, the effect of Red-Eye Reduction 
may be negligible.

 

Do not put your hands over the light-emitting area of the flash (

8) or look at it 

from close range (a few centimeters away).
Do not use the flash at close distances to other subjects (heat/light may damage subject).

 

Flash settings may be changed when changing Recording Mode.

 

Scene Mode flash settings are restored to default when Scene Mode is changed.

 

Edges of picture may become slightly dark if using flash at short distances without 
using zoom (close to max. W). This may be remedied by using a little zoom. 

 

No pictures may be taken if these marks (e.g. 

) are flashing (flash is charging).

 

Insufficient light may prevent appropriate exposure or White Balance.

 

Flash charging may take time if battery is low, or if using flash repeatedly.

Summary of Contents for DMC-ZS8S





























































































































Reviews: