Panasonic DMC-ZS30 Owner'S Manual Download Page 59

Page: 59 / 314

Basics

Using the [Setup] menu

VQT4T08

- 59 -

•For the setting procedures of the menu.

(→54)

[Monitor Display]

Adjust brightness and color of the LCD monitor. It is suggested to use the default settings.

These are intended to provide a preview of the actual picture, as accurately as possible.

Press to select the setting item and press to make adjustments

Press [MENU/SET]

●

Some subjects may look different from their actual appearance, but the recorded

picture will not be affected.

[Calibrate compass]

DMC-ZS30

Adjust the built-in compass.

(→186)

[Monitor Luminance]

Make LCD monitor easier to see.

■

Settings

[Auto Power Monitor]:

The brightness is adjusted automatically depending on how bright it is around the

camera.

[Power Monitor]:

Makes screen brighter than normal. (for outdoor use)

[OFF]

●

Cannot select [Auto Power Monitor] in playback mode.

●

[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds

when recording. (Press any button to make the screen brighter again.)

●

Because the picture shown on the LCD monitor screen emphasizes brightness, some

subjects may look different than their actual appearance, but this will not affect the

recorded picture.

●

Setting [Monitor Luminance] reduces the operating time.

Summary of Contents for DMC-ZS30



























































































































































































































































































































Search results

Summary of Contents for DMC-ZS30

Reviews:

Related manuals for DMC-ZS30

Brands by name

Popular brands

Panasonic DMC-ZS30, Owner'S Manual

Search results

Summary of Contents for DMC-ZS30

Reviews:

Related manuals for DMC-ZS30

Brands by name

Popular brands