Panasonic DMC-ZS30 Owner'S Manual Download Page 288

Page: 288 / 314

Others

Q&A Troubleshooting

VQT4T08

- 288 -

About the Wi-Fi function (continued)

Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to

be repaired.

●

The settings stored in the camera may be deleted depending on the type of repair.

→ Always make a copy of important settings.

There is an image that could not be transmitted.

●

Is the size of the image too large?

→ Divide the motion picture using [Video Divide]

(→149)

→ Reduce the image size at [Size]

(→214)

, and then send.

●

Capacity or number of images in the WEB service is full.

→ Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link settings.

I have forgotten the password for the Wi-Fi.

→ Execute the [Reset Wi-Fi Settings] in the [Setup] menu.

(→63)

→ However, all the information you have set on the [Wi-Fi Setup] menu, which includes the “LUMIX

CLUB” login settings, will be reset. (excluding [LUMIX CLUB])

Transmission of the image fails midway.

●

Is the size of the image too large?

→ Transmit after dividing the motion picture with [Video Divide]

(→149)

→ Reduce the image size at [Size]

(→214)

, and then send.

→ Image cannot be transmitted when the battery indicator is flashing red.

Motion picture cannot be transmitted.

●

File format of the motion picture that can be sent differs depending on the destination.

(→192)

●

Is the size of the image too large?

→ Transmit after dividing the motion picture with [Video Divide]

(→149)

I cannot send images to an AV device.

●

Sending may fail depending on the operational status of the AV device.

Also, sending may take a while.

I cannot connect using the NFC function.

●

The smartphone is not NFC compatible.

This function can be used with NFC compatible devices with Android (2.3.3 or above).

●

Is the NFC function on the smartphone turned off?

●

The [NFC Operation] on this unit is set to [OFF].

(→202)

●

The camera has a hard time recognizing some smartphone models. If it is not recognized, slowly

shift the smartphone while it is beside the unit.

Summary of Contents for DMC-ZS30



























































































































































































































































































































Search results

Summary of Contents for DMC-ZS30

Reviews:

Brands by name

Popular brands

Panasonic DMC-ZS30, Owner'S Manual

Search results

Summary of Contents for DMC-ZS30

Reviews:

Brands by name

Popular brands