background image

Wi-Fi

Send Images Stored in the Camera

VQT4T08

- 232 -

Select and send the images

 

[SINGLE] setting

 Use cursor button to select the picture

 Press [MENU/SET]

 •Confirmation screen is displayed. If you select [Yes], the operation is 

executed.

 

[MULTI] setting

  Use cursor button to select the picture, and then press [DISP.] button to set 

(repeat)

 •The setting is canceled when [DISP.] button is pressed again.

  Press [MENU/SET]

 •Confirmation screen is displayed. If you select [Yes], the operation is 

executed.

 

Images uploaded to the WEB Service cannot be displayed or deleted with this 

camera. Check images by accessing the WEB Service with your smartphone/tablet or 

computer.

 

If sending images fails, a report email outlining the failure will be sent to the email 

address registered with “LUMIX CLUB”.

 

The number of pictures that can be sent by [MULTI] is limited.

 

Images may contain personal information that can be used to identify the user, 

such as a title, the time and date when the images was taken, and the location 

where the image was taken. Check this information before uploading images to 

WEB services.

 

Panasonic assumes no responsibility for the damages resulting from the leakage, 

loss, etc. of images uploaded on WEB services.

 

When uploading images to the WEB Service, do not delete images from this 

camera, even after they have finished sending, until you have checked that 

they have been properly uploaded to the WEB Service. Panasonic assumes no 

responsibility for the damages resulting from the deletion of images stored in this 

unit.

Summary of Contents for DMC-ZS30



























































































































































































































































































































Reviews: