Panasonic DMC-ZS30 Owner'S Manual Download

Page: 306 / 314

Others

Usage cautions and notes

VQT4T08

- 306 -

This product includes software written by Tim Hudson ([email protected]).

Original SSLeay License

This package is an SSL implementation written by Eric Young ([email protected]).

The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are

adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA,

lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is

covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).

If this package is used in a product, Eric Young should be given attribution as the author of the parts of

the library used. This can be in the form of a textual message at program startup or in documentation

(online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions

and the following disclaimer in the documentation and/or other materials provided with the

distribution.

3. All advertising materials mentioning features or use of this software must display the following

acknowledgement:

“This product includes cryptographic software written by Eric Young ([email protected]) ”

The word ‘cryptographic’ can be left out if the routines from the library being used are not

cryptographic related :-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory

(application code) you must include an acknowledgement:

“This product includes software written by Tim Hudson ([email protected]) ”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The license and distribution terms for any publically available version or derivative of this code

cannot be changed. i.e. this code cannot simply be copied and put under another distribution license

[including the GNU Public License.]

Summary of Contents for DMC-ZS30



























































































































































































































































































































Search results

Summary of Contents for DMC-ZS30

Reviews:

Related manuals for DMC-ZS30

Brands by name

Popular brands

Panasonic DMC-ZS30, Owner'S Manual

Search results

Summary of Contents for DMC-ZS30

Reviews:

Related manuals for DMC-ZS30

Brands by name

Popular brands