134
VQT2R24
VQT2R24
135
Using [PLAYBACK] menu
(Continued)
Playback mode:
(Set mode dial to any except
)
For the [PLAYBACK] menu setting procedure (
→
20)
[COPY]
You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU/SET]
→
[PLAYBACK] menu
→
Select [COPY]
Select copy method (direction)
: Copy all pictures from built-in memory to card
(go to step )
(Clipboard pictures cannot be copied. Use
[COPY] in the [CLIPBOARD] menu (
→
109).)
: Copy 1 picture at a time from card to built-in
memory.
: Copy 1 picture at a time from card to clipboard
folder (in built-in memory) (not motion pictures).
Select picture with
◄
►
and press [MENU/SET] (for
and
)
Select [YES]
• To cancel
→
Press [MENU/SET]
• After confirmation, press to return to the menu
screen.
(Screen shown is example)
●
If there is not enough space on the built-in memory for copying to be performed, turn
off the power, remove the card, and delete pictures from the built-in memory (to delete
clipboard pictures, set the mode dial to Clipboard Mode).
●
Copying of picture data from the built-in memory to memory cards will be terminated
midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory
(approx. 15 MB
, approx. 40 MB
)
is
recommended.
●
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
●
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card (
).
Identically-named files will not be copied from card to built-in memory (
).
●
DPOF settings will not be copied.
●
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
●
Original pictures will not be deleted after copying (to delete pictures (
→
45)).
●
This setting can only be made when the Playback Mode is [NORMAL PLAY].
●
Motion pictures recorded in [AVCHD Lite] format cannot be set.
[PLACE-NAME EDIT]
You can edit place name information recorded by GPS function.
Operation: Press [MENU/SET] on the playback screen and select
→
[PLAYBACK] menu
→
[PLACE-NAME EDIT]
Select the picture
Select the location name or
landmark name to edit.
Select [REPLACE]
Enter characters
(Entering text
(
→
111))
Select [YES]
If you want to edit another
location name or landmark
name, repeat steps to
•
After setting, press to return to the
menu screen.
■
To delete a location name or landmark name
In step , select [DELETE] with
▼
, and then select [YES].
