106
VQT2R24
VQT2R24
107
For [REC] menu setting procedures (
→
20)
Using [REC]/[MOTION PICTURE] menu
(Continued)
[REC QUALITY]
Sets the picture quality of the motion picture that is recorded.
■
Recording mode:
→
[MOTION PICTURE] menu
■
Settings:
[AVCHD Lite (GPS)] in [REC MODE]
Setting
Resolution
Bit rate
∗
1
Aspect ratio
[GSH]
1280 x 720
17 Mbps
16:9
[GH]
1280 x 720
13 Mbps
[GL]
1280 x 720
9 Mbps
[AVCHD Lite] in [REC MODE]
Setting
Resolution
Bit rate
∗
1
Aspect ratio
[SH]
1280 x 720
17 Mbps
16:9
[H]
1280 x 720
13 Mbps
[L]
1280 x 720
9 Mbps
[MOTION JPEG] in [REC MODE]
Setting
Resolution
Frame rate
∗
2
Aspect ratio
[HD]
1280 x 720
30 fps
16:9
[WVGA]
848 x 480
30 fps
[VGA]
640 x 480
30 fps
4:3
[QVGA]
320 x 240
30 fps
∗
1
The bit rate is the amount of data per unit time. A higher value translates into a higher image
quality. This camera uses the VBR (Variable Bit Rate) recording system and the available
recording time is shorter when recording a subject with rapid movements.
∗
2
The frame rate is the number of frames per second.
●
[WVGA] cannot be set in [INTELLIGENT AUTO] Mode.
●
[QVGA] only can be recorded to the built-in memory.
[REC QUALITY]
For details (
→
77)
[CONTINUOUS AF]
Either allow the focus to be constantly adjusted during motion picture recording, or fix the
focus position at the start of recording.
■
Recording mode:
→
[MOTION PICTURE] menu
→
[REC] menu
■
Settings: [ON] :
Adjust focus according to movement of subject during motion picture
recording. (
appears on the screen.)
[OFF] :
Fix focus position at the start of motion picture recording.
Use this setting to keep the same focus position for subjects with
little forward/backward movement.
[WIND CUT] is not available in the DMC-TZ9/DMC-TZ8.
[WIND CUT]
Reduces recording of wind sounds (wind noise) when recording in a strong wind
■
Recording mode:
→
[MOTION PICTURE] menu
■
Settings: [OFF]/[ON] (
appears on the screen.)
●
When [WIND CUT] is set to [ON], lower sounds will be eliminated and the sound quality
will differ from that of normal recordings.
