Panasonic DMC-FT5EA, Service Manual

Page: 20 / 62

20
3. Error Code List
The error code consists of 8 bits data and it shows the following information.
Attribute Main item Sub item Error code Contents (Upper) Error Indication
High
4bits Low 4
bits
Check point (Lower) Detecting
device
Part/Circuit
LENS Lens drive OIS 18*0 1000 PSD (X) error. Hall element (X axis) position detect error in
OIS unit. OIS X LENSu NG
OIS Unit
2000 PSD (Y) error. Hall element (Y axis) position detect error in
OIS unit. OIS Y
OIS Unit
3000 GYRO (X) error. Gyro (IC7101) detect error on Main P.C.B. GYRO X GYRO NG
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
4000 GYRO (Y) error. Gyro (IC7101) detect error on Main P.C.B. GYRO Y
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
5000 GYRO (R) error. Gyro (IC7101) detect error on Main P.C.B. GYRO R
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
6000 Drive voltage (X) error. OISX REF LENSu/LENS
FPC
LENS Unit, LENS flex breaks, IC6001(VENUS ENGINE)
AD value error, etc.
7000 Drive voltage (Y) error. OISY REF
LENS Unit, LENS flex breaks, IC6001(VENUS ENGINE)
AD value error, etc.
8000 OIS GYRO - Digital communication error. (No indication) (No indication)
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
Zoom 0?10 Collapsible barrel Low detect error
(Collapsible barrel encoder always detects Low.) ZOOM L ZOOMm/
LENSu
Mechanical lock, FP9002-(40) signal line or IC6001
(VENUS ENGINE)
0?20 Collapsible barrel High detect error
(Collapsible barrel encoder always detects High.) ZOOM H
Mechanical lock, FP9002-(40) signal line or IC6001
(VENUS ENGINE)
0?30 Zoom motor encoder error. ZOOM ENC
Mechanical lock or IC6001 (VENUS ENGINE)
0?40 Zoom motor encoder error. (During monitor mode.)
Mechanical lock or IC6001 (VENUS ENGINE)
0?50 Zoom motor encoder error. (During monitor mode with
slow speed.)
Mechanical lock or IC6001 (VENUS ENGINE)
0?60 The zoom position jump is detected due to the impact (i.e.
drop.) to the camera occurs. (No indication) (No indication)
Lens unit
Focus 0?01 HP High detect error
(Focus encoder always detects High, and not becomes
Low) FOCUS L LENS FPC/
DSP
Mechanical lock, FP9002-(40) signal line or IC6001
(VENUS ENGINE)
0?02 HP Low detect error
(Focus encoder always detects Low, and not becomes
High) FOCUS H
Mechanical lock, FP9002-(40) signal line or IC6001
(VENUS ENGINE)
Lens 10*8 0000 Lens cap error (No indication) (No indication)
Zoom motor, zoom pulse encoder 2
18*1 0000 Power ON time out error. LENS DRV LENSu
Lens drive system
18*2 0000 Power OFF time out error.
Lens drive system