Panasonic Digital Palmcorder PalmSight PV-DV200-K Operating Instructions Manual Download Page 75 | Manualshive

Page: 75 / 84

background image

75

For Y

our

Inf
ormation

Head

(a) Video Head Cleaning:

Normally, your Palmcorder will not

require head cleaning. However, it is possible that the heads
may become clogged due to dust in the air, damaged tape,
long term use, etc. If “NEED HEAD CLEANING” appears for 5
seconds in the EVF or LCD monitor, the heads may require
cleaning.

(b) Cleaning the Heads:

It is recommended that head

cleaning be performed by a qualified service technician.
Please contact your nearest Panasonic Servicentre. An
alternate solution is to obtain a head cleaning cassette. Please
use a Panasonic cleaning cassette (AY-DVMCL). Be sure to
follow the cleaning instructions carefully. Excessive use of the
head cleaning cassette could shorten video head life.
Use this cassette only when a head clogging symptom occurs.

Refer servicing to qualified service personnel.

Before Requesting Service

Clogged Video

• When you go from function to function (PLAY, FF, REW etc.), please note that the unit

will not accept a new function operation until the previous operation is complete.

• The POWER Button, and all function buttons, (PLAY, FF, REW, etc.) are only operational

after the tape has been completely loaded.

• With a Wide or Telephoto Conversion Lens (optional) attached, the four corners of the

screen may darken when zoom is set to maximum wide angle.

• Attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. after a filter

(optional) has been attached, the four corners of the screen may darken when zoom is
set to maximum wide angle.

• With two filters (optional) attached, the four corners of the screen may darken when

zoom is set to maximum wide angle.

Lens Hood Area Operation Caution

Caution for Tape Operations

Cleaning Care for Video Heads

200_400-K.71-78.p65

00/06/14, 13:14

75

«
...
73
74
75
76
77
...
»

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K





















































































Reviews:

No comments

Related manuals for Digital Palmcorder PalmSight PV-DV200-K

Brand: Pentax Pages: 40

Brand: Odys Pages: 40

Brand: Vivitar Pages: 57

Brand: Aukey Pages: 68

Brand: Beneston Pages: 5

7920A001 - GL 2 Camcorder

Brand: Canon Pages: 163

mydlink DCS-8010LH

Brand: D-Link Pages: 40

Brand: Panasonic Pages: 284

D8 Digital Handycam DCR-TRV720E

Brand: Sony Pages: 212

D8 Digital Handycam DCR-TRV820E

Brand: Sony Pages: 233

D8 Digital Handycam DCR-TRV420E

Brand: Sony Pages: 287

D8 Digital Handycam DCR-TRV420E

Brand: Sony Pages: 184

Brand: Canon Pages: 2

Brand: Panasonic Pages: 29

Brand: Pure Digital Pages: 1

Brand: Pure Digital Pages: 1

Small Wonder EZ105

Brand: RCA Pages: 2

Brand: Panasonic Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands