Panasonic Digital Palmcorder PalmSight PV-DV200-K Operating Instructions Manual Download

Page: 28 / 84

The following warning displays appear in the EVF and the LCD monitor.

Electronic Viewfinder/LCD Monitor Indications

Warning Indications

If the Palmcorder is in CAMERA mode without a
cassette inserted, “

” will flash and “TAPE NOT

INSERTED” will appear for 5 seconds. Recording will
not start.

If the Palmcorder is in CAMERA mode with the cassette
sliding record tab opened, “

” will flash and “CHECK

REC TAB” will appear for 5 seconds. Recording will not
start.

When Audio dub is performed and the sliding record
tab is open, or a blank portion of tape is detected, “

”

will flash and “CANNOT REC” will appear for 5
seconds.

When the tape is about to end in REC mode, “

END”

will flash and “TAPE END” will appear for 5 seconds.

When an incompatible tape is detected,
“INCOMPATIBLE TAPE” will appear for 5 seconds.

If the video heads require cleaning, “NEED HEAD
CLEANING” will appear for 5 seconds.

When the Palmcorder and remote are not set to the
same mode (VCR1 or VCR2), “CHECK REMOTE
MODE” will also appear for 5 seconds when the
Palmcorder is first turned on.

TAPE NOT
INSERTED

CHECK

REC TAB

CANNOT REC

TAPE END

END

INCOMPATIBLE

TAPE

NEED HEAD

CLEANING

R E M O T E

200_400-K.20-29.p65

00/06/14, 13:10

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K





















































































Search results

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K

Reviews:

Related manuals for Digital Palmcorder PalmSight PV-DV200-K

Brands by name

Popular brands

Panasonic Digital Palmcorder PalmSight PV-DV200-K, Operating Instructions Manual

Search results

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K

Reviews:

Related manuals for Digital Palmcorder PalmSight PV-DV200-K

Brands by name

Popular brands