background image

1

INSTRUCTIONS

ENGLISH

LYT0903-001A

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).

• Available when the Power Switch 

@

 is set to “

” or “

”.

• Performing any operation during the demonstration stops the demonstration temporarily. If no operation

is performed for more than 1 minute after that, the demonstration will resume.

• “DEMO MODE” remains “ON” even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch 

@

 to “

” and press the MENU Wheel 

1

 in

while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel 

1

 to select “OFF” and press it.

NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the

camcorder, demonstration is not available.

• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration

activated on the LCD monitor* or viewfinder.

* Applicable models only.

Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (

 pg. 3, 4) to ensure safe use of this product.

®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.

COPYRIGHT©  2001 VICTOR COMPANY OF JAPAN, LTD.

Printed in Malaysia
1001MKV

*

UN

*

PJ

ED

COMPACT VHS CAMCORDER

GR-SXM87ED
GR-SXM67ED
GR-SX37ED

VHS
PAL

625

Summary of Contents for GR-SX37ED

































Reviews: