Panasonic Digital Palmcorder PalmSight PV-DV200-K Operating Instructions Manual Download Page 54

Page: 54 / 84

Special Features

(No display)

SPORTS

PORTRAIT

LOW-LIGHT

SPOT-LIGHT

SURF&SNOW

Program AE

JOG KEY

MENU Button

The Auto Exposure feature can be used to
make quality recordings in a variety of
scene situations.

SPORTS mode

• The recorded images will not be so blurred

when they are viewed later using slow or
still picture playback.

• When playing back a sports mode
recording, the movement may appear
slightly jerky.
• Do not use this mode when recording

under fluorescent, mercury or sodium
lighting. These types of lights will affect
the colour and brightness of the images.

• A vertical band of light might appear

when recording objects that are brightly
illuminated or which are highly reflective.

• If the amount of light is insufficient, the

SPORTS “

” indicator will flash in the

EVF or the LCD monitor.

• The image may flicker if this mode is used

indoors.

PORTRAIT mode

• The image may flicker if this mode is used

indoors.

LOW-LIGHT mode

• Scenes recorded in extremely low light

levels may not come out properly.

SPOT-LIGHT mode

• If the recorded subject is extremely bright,

the picture may appear whitish.

SURF&SNOW mode

• If the recorded subject is extremely bright,

the picture may appear whitish.

• It is not possible to select the SPORTS

mode and PORTRAIT mode together with
the GAIN UP in the Digital function
camera menu.

Note

Set POWER to CAMERA.

• The POWER lamp lights red.
• Be sure POWER is fully turned to

CAMERA position.

Press MENU

to display the menu

screen.

Press JOG KEY

to select

ADJUST

and then

press JOG KEY

to display

the CAMERA ADJUST menu screen.

Rotate JOG KEY

to select

PROG.AE

, and then

press JOG KEY

to select one of the five modes shown
below.

Repeat steps 4~5

to select OFF to

cancel this feature.

• Sports mode

For recording fast action scenes.

• Portrait mode

For recording only subjects in the
foreground, while ignoring subjects in
the background.

• Low-light mode

For recording in extreme low light
conditions.

• Spot-light mode

Recording in situations where subjects
are under a spotlight(s).

• Surf & Snow mode

For recording in locations with a high
degree of “Dazzle”, such as snow slopes
and the seashore.

POWER
Switch

200_400-K.50-56.p65

00/06/14, 13:13

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K





















































































Search results

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K

Reviews:

Related manuals for Digital Palmcorder PalmSight PV-DV200-K

Brands by name

Popular brands

Panasonic Digital Palmcorder PalmSight PV-DV200-K, Operating Instructions Manual

Search results

Summary of Contents for Digital Palmcorder PalmSight PV-DV200-K

Reviews:

Related manuals for Digital Palmcorder PalmSight PV-DV200-K

Brands by name

Popular brands