G
etting
sta
rte
d
VQT2J58
12
Auto Setup
5
Press [BACK/RETURN ] to confirm.
6
Enter the new PIN.
≥
Make a note of PIN in case you forget it.
≥
The default PIN is “0000”.
1
Select the number, then press [
1
].
2
Repeat step
1
.
3
Press [OK] twice.
7
Set “Power Save” to “On”, “On Timer”
or “Off”, then press [OK].
≥
Video from AV2 input cannot be viewed with
this unit in standby mode when Power Save in
Standby mode is activated.
When the following screen appears, Easy setting
is complete.
≥
Select “Yes” to proceed to “Network Easy
Settings”. (
>
13)
≥
Select “No” to finish the Setup.
To stop partway
Press [BACK/RETURN
].
To restart set up
1 While stopped
Press [FUNCTION MENU].
2 Select “Others”, then press [OK].
3 Select “Setup”, then press [OK].
4 Select “Auto Setup” in “Tuning”, then press [OK].
To display the Owner ID information on TV
Press and hold [
∫
] on the main unit for more than
5 seconds.
The PIN is not displayed.
After 30 seconds this menu automatically disappears.
You cannot change the Owner ID on this screen.
You can perform this operation after step 6.
¾
To confirm the Channel List (
>
76, Channel
List)
¾
To check the signal condition (
>
77, Signal
Condition)
¾
To change PIN (
>
86, PIN Entry)
¾
To sort the Channel List by region (
>
76,
Channel Sorting by Region)
On
Power consumption will be reduced
to a minimum level in standby
mode.
On
Timer
Set period of power save and then
press [OK].
≥
Power Save in Standby mode is
activated at the set time period.
Off
It is possible to start quickly from
the standby mode. (Quick Start
mode)
≥
If you use Home Network (DLNA)
Function (
>
66), select "Off". This
function is not available with other
settings.
RETURN
Enter a new 4-digit PIN, then press OK.
This PIN will be used for controlling viewing and playback.
PIN will be set to “0000” by pressing “RETURN” when there is no
number input.
0
-
Number
9
PIN Entry
-
-
-
-
OK
RETURN
Power Save in Standby
Standby power consumption is reduced by disabling
Quick Start function and AV2 loop-through in standby.
Home Network (DLNA) function is not available in both standby
and power on modes
From
To
Power Save
0
6
On
OK
Easy Setting
Easy Setting has been completed.
To use Internet functions, network connection needs
to be made first. Proceed Network Easy Settings ?
Select “Yes” to start. Select “No” to exit the Setup.
Yes
No
DMRXW380EB-VQT2J58_eng.book 12 ページ ２０１０年４月８日 木曜日 午後３時５４分
Summary of Contents for DIGA DMR-XW380
Page 122: ...Reference VQT2J58 122 ...
