31
RQT9126
To cancel a timer recording in progress
STOP
– Confi rmation screen appears.
to select “Stop Recording”,
then
OK
Notes
Recording stops and the timer programme is deleted. (Daily and
weekly timer programmes remain and timer recording will start
from the next time the timer recording is set.)
PROG/CHECK
– See “Timer Recording screen icons” (
¼
32)
for explanation of icons displayed.
,
to select the programme.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
Notes on timer recording
When a timer recording is set, DVDs that were recorded using
a different TV system cannot be played unless the TV system is
changed in the Setup Menu (
¼
67) or the timer recording has
completed or has been cancelled.
Timer recordings are activated regardless of whether the unit is
turned on/off.
Timer recordings begin when the set time is reached even when
playing.
Timer recordings do not begin while editing or copying.
If the unit is turned on when timer recording begins, it
remains turned on after recording fi nishes. It does not turn off
automatically. You can turn the unit off during timer recording.
If the unit is not put in the timer recording standby mode at least
10 minutes before the programmed timer recording starting time,
the “
” fl ashes on the unit’s display.
When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Programme
Programme
Recorded
Recorded
Not recorded
– “
” (
¼
32) disappears from the timer
recording list.
– Press the “Red” button again to activate timer
programme.
(Red)
Ad
v
anced Features
Ad
v
anced Features
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform steps
-
(
¼
above)
1. Press [OPTION]
2. Press [
,
] to select “Timer Off”, then press [OK].
While the unit is on
DRIVE
SELECT
to select the drive.
DMR-EZ48V̲EB.indb 31
DMR-EZ48V̲EB.indb 31
2008/04/04 16:39:25
2008/04/04 16:39:25
