28
RQT9126
Preparation:
Turn on the unit.
[RAM]
If the disc is protected, release protection
(
¼
60).
[VHS]
Ensure accidental erasure tab is intact.
When the output signal from the external device is
NTSC, change the “TV System” to “NTSC” in the
Setup Menu (
¼
67).
This unit cannot record NTSC signals to discs that
already have PAL signal recordings.
To reduce noise in input from a video cassette
recorder, set “Copy NR” to “On” in the on-screen
display (
¼
59).
DRIVE
SELECT
to select the DVD or VHS
drive.
– Insert a disc or video cassette with enough
remaining blank space (
¼
73, 74).
REC MODE
to select the recording
mode (
¼
24).
Recording from a VCR, etc.
SELECT
INPUT
to select the input
where your external device is
connected.
–
Front panel inputs are AV3.
Tips
[RAM]
[-R]
[-R]DL]
[-RW‹V›]
[+R]
[+R]DL]
[+RW]
Using Flexible Recording (
¼
24), you can record the content of a
video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.
To skip unwanted parts
Press [
PAUSE] to pause recording. (Press again to restart
recording.)
To stop recording
Press [
STOP].
Notes
When timer recording starts while recording from an external
device, timer recording takes priority and recording from the
external device stops.
If video is copied from another piece of equipment to this unit,
then the video quality will be degraded.
Almost all videos and DVD-Video on sale have been treated to
prevent illegal copying. Any software that has been so treated
cannot be recorded using this unit.
Recording from an External Device
Connect cables while both the unit and the external
device are turned off.
Front of the unit
S VIDEO
AV3 IN
VIDEO
/MONO AUDIO R
L
S VIDEO
IN 2
VIDEO
/MONO AUDIO R
L
You can get a
sharper, clearer
picture by connecting
with an S Video cable
instead of the yellow
video cable.
Yellow White Red
S Video cable
Audio/video
cable
[RAM]
[-R]
[-R]DL]
[-RW‹V›]
[+R]
[+R]DL]
[+RW]
Perform steps
−
left.
Start play on the external device.
REC
at the point you want to
start recording to the disc.
PAUSE
to start recording at the
point you desire.
[VHS]
Perform steps
−
left.
PLAY
to bring the tape to the
point at which you want to start
recording from.
PAUSE
when you reach that point.
REC
to put the unit in recording
standby.
Start play on the external device.
[VHS]
Recording to VHS
Recording to DVD
If the audio output of the external device is monaural, connect to
L/MONO on the AV3 input terminals at the front.
DMR-EZ48V̲EB.indb 28
DMR-EZ48V̲EB.indb 28
2008/04/04 16:39:23
2008/04/04 16:39:23