19
RQT9126
Confi rm the programme (start and end time) by TV
magazine, etc. and correct if
necessary using
,
,
,
,
then
OK
– The settings are stored and the timer programme
is on.
– The timer icon is displayed.
– “
” lights on the unit’s display to indicate timer recording standby has been activated.
– Repeat steps
–
to programme other recordings.
– Press [
/l] to turn the unit off.
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit.
Turn on this unit.
Insert a disc or video cassette that you use for recording (
¼
73, 74).
[RAM]
If the disc is protected, release protection (
¼
60).
[VHS]
Ensure accidental erasure tab is intact.
Confirm that the clock on the unit’s display is set to the correct time.
,
,
to select the future programme, then
OK
Landscape
TV Guide:
Category
All Services
All Types
Prog. Type
SELECT
TIMER REC
RETURN
Guide Change Display Mode
Page
Page
+24 Hr
Prog. Type
Category
Time:
info
BBC 1
BBC 2
Thu 21/02/08 19:45
Holiday Programme
Wed 13th
Timer
Recording
Remain
THU 21/02/08 19:45:16
RETURN
OK
Mode STTL
Stop
Start
Name
Name
Date
Drive
21:40
20:30
13/ 1 WED
SP
OFF
DVD
3 BBC
Programme Name
Press OK to store the programme.
DELETE
Channel 4
Channel 5
10
31
45
70
Number
--
0
9
-24 Hr
1:58 SP
DVD
--:----
VHS
All Services : BBC 2
Holiday Programme
(Guide Link)
STATU
A
A S
CREAT
A
A E
CHAPTER
FU
NC
TIO
N
M
EN
U
DI
RE
CT
NA
VA
IG
ATAA
OR
GUIDE
RETURN
PLAY
PA
PP USE
STOP
SLOW/SEARCH
CH
SELECT
INPUT
0
9
8
7
6
5
4
3
2
1
CH
AV
A
A
TV
DRIVE
SELECT
DVD/VHS
VOL
DELETE
MANUAL SKIP
PROG/CHECK
EXIT
OK
OPTION
TRACKING/V-LOCK/PAGE
SKIP/INDEX
RESET
REW
FF
Refer to “TV Guide” (
¼
34) and “Advanced Timer Recording” (
¼
30) for
detail information on TV Guide.
[RAM]
[-R]
[-R]DL]
[-RW‹V›]
[+R]
[+R]DL]
[+RW]
[VHS]
Notes
The TV Guide list is not displayed
immediately after purchasing this unit.
The TV Guide system will not work if
the clock is not set correctly.
If “NTSC” has been selected for “TV
System” (
¼
67), the TV Guide system
cannot be used.
“FR” recording mode is not available
when the timer programme is controlled
by “Guide Link”.
Simultaneous recording to both DVD
and VHS is not possible.
Tips
[RAM] [-RW‹V›]
[+R] [+R]DL] [+RW]
To use a new disc, formatting is
necessary.
To check programmes (
¼
32)
To cancel a timer recording
programming
1.Press [
,
,
,
] to select the
programme (the timer icon is displayed)
and press [OK].
– Confi rmation screen appears.
2.Press [
] to select “Yes” and press
[OK].
– The timer icon disappears.
GUIDE
– The TV Guide list appears.
y
&
Timer icon
Timer Recording
Basic Operations
What is Freeview built-in?
Freeview built-in is a function that enables timer recordings to be controlled by the signal
sent from the broadcaster. “Guide Link” is available.
“
Guide Link
” — If you set a timer recording from the TV Guide, recording start and stop
times can be controlled by the broadcaster, e.g., delayed recording start time.
This is indicated by “Guide Link” in the Timer Recording screen in step
(
¼
below).
If you set a timer recording from the TV Guide, the recording’s start and stop times are
controlled by the signal sent from the broadcaster. If the signal is not sent correctly,
the recording may lack the beginning or the ending part of the programmes.
In order to make the timer recording work successfully, we recommend you set the
start time earlier and the end time later by some minutes, up to a maximum of 10
minutes for Guide Link to function.
e.g. When you set the timer recording for a programme that will start at 10:00 and
end at 11:00, set “9:58” and “11:05” in step
(
¼
below).
“Guide Link” will not be displayed and will not function under the following conditions.
–
Timer programmes set manually (
¼
30).
–
Timer programmes set from the TV Guide are modified or start/stop time changed by
more than 10 minutes from original time.
“Guide Link” is displayed here.
DMR-EZ48V̲EB.indb 19
DMR-EZ48V̲EB.indb 19
2008/04/04 16:39:18
2008/04/04 16:39:18
