21
RQT9126
Basic Operations
Copying Titles (DVD
¼
VHS)
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit.
[VHS]
Ensure accidental erasure tab is intact.
Insert a video cassette with enough space for recording. Stop the tape
at the point where you want to start copying to.
Select the VHS recording mode (
¼
24).
Insert the disc containing the programme to be copied.
[RAM]
[-RW‹VR›]
Press and hold [STTL
] for about 5 or more seconds
to select the audio you wish to record.
On the main unit
COPYING
COPYING
Press and hold for about
3 seconds.
Notes
If you start copying when the resume
function is activated, the DVD is
copied from the beginning of the title
you stopped play at.
To copy a whole disc, press [
STOP]
to deactivate it before copying (
¼
17).
When copying doesn’t start, the
“COPYING” indicator on the main unit
blinks for about 7 seconds. Check if
the unit is properly prepared.
Tips
When you start copying from the selected title
1. Press [DRIVE SELECT] to select the DVD drive.
2. Press [DIRECT NAVIGATOR].
3. Press [
,
,
,
] to select the recording you want to start, then press [OK].
4. Go to the operation shown above.
Index signals are automatically recorded on the tape according to the division of titles on
the DVD [
¼
42, VHS Index Search System (VISS)].
To cancel copying in the middle
Press [
STOP].
− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying in
the middle.
All titles on the disc are automatically copied onto the tape.
[RAM]
[-R]
[-R]DL]
[-RW‹V›]
[-RW‹VR›] [+R]
[+R]DL]
[+RW]
¼
[VHS]
COPYING
COPYING
COPYING indicator
− Check if copying starts properly (“COPY” lights on the unit’s display).
− Copying automatically stops when playback of the disc fi nishes or the tape
reaches its end.
DMR-EZ48V̲EB.indb 21
DMR-EZ48V̲EB.indb 21
2008/04/04 16:39:19
2008/04/04 16:39:19
