RQT8016
7
Ge
tt
in
g sta
rt
e
d
STEP
1
Connection
•
The equipment connections described are examples.
•
Before connection, turn off all equipment and read the appropriate operating instructions.
•
Peripheral equipment and optional cables are sold separately unless otherwise indicated.
■
To view satellite/digital terrestrial programmes
•
Change the “AV2 Input” setting to match the output from a satellite/digital terrestrial receiver in the SETUP menu (
➔
page 36) after tuning is
completed (
➔
page 11, 12).
•
Press [INPUT SELECT] to select the input channel “A2” for the satellite/digital terrestrial receiver or put this unit in standby mode.
■
RGB
This refers to the three primary colours of light, red (R), green (G), and blue (B) and also the method of producing video that uses them. By
dividing the video signal into the three colours for transmission, noise is reduced for even higher quality images.
■
Q Link functions
Connect to a compatible TV as shown above to use Q Link functions such as Direct TV Recording (
➔
page 17).
Q Link offers a range of convenient functions (For further details
➔
page 42). Make sure to connect a fully wired 21-pin Scart lead to the
television if using the Q Link function.
The following systems from other manufacturers have similar function to Q Link from Panasonic. For details, refer to your television’s operating
instructions or consult your dealer.
•
Q Link (registered trademark of Panasonic)
•
DATA LOGIC (registered trademark of Metz)
•
Easy Link (registered trademark of Philips)
•
Megalogic (registered trademark of Grundig)
•
SMARTLINK (registered trademark of Sony)
■
Linked timer recordings (
➔
page 21)
Connect to a satellite/digital terrestrial receiver as shown above to control timer recording, e.g. External Link 1.
Connecting a television with 21-pin Scart terminal and Satellite/Digital terrestrial
receiver
VHF/UHF
RF IN
AV IN
DVD/VCR
1
2
3
4
1
4
Television’s rear panel
This unit’s rear panel
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
indicates included accessories.
indicates accessories not included.
are required connections. Connect in the numbered order.
Fully wired 21-pin Scart lead
(For External Link functions)
Satellite/Digital terrestrial receiver’s rear panel
AV1 terminal
If your television is equipped with RGB input capability, by
connecting with a fully wired 21-pin Scart lead you can
see video using RGB output on this unit (
➔
below).
Fully wired 21-pin Scart lead
(For Q Link functions)
RF coaxial
lead
AC mains lead
Connect only after all other
connections are complete.
To household mains socket
(AC 220-240 V, 50 Hz)
To the
aerial
Aerial lead
DMR-ES10-EB.fm Page 7 Tuesday, February 8, 2005 9:29 AM
