Panasonic DC-S1P, Service Manual

Page: 63 / 66

63
11 Maintenance
11.1. Notice in External Cleaning
11.1.1. About the Body
NOTE:
Before cleaning the camera, remove the battery and/or disconnect power plug from the outlet.
Also, remove the memory card and lens unit.
11.1.1.1. Dust/Dirt on the Outer Casing Part (S)
1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush.
2. Wipe up fingerprint and/or dirt on the Outer casing part with the dry fuzz-free cloth.
11.1.1.2. Dust/Dirt on the Image Sensor
1. Blow off the dust on the surface of the Image sensor with the Blower.
• Keep the Mount Facing down condition towards to floor when cleaning.
• Do not put the Blower further inside than the lens mount.
• Be careful not to blow too strongly.
2. Wipe off the dirt on the image sensor surface with Lens Cleaning Kit (BK)(VFK1900BK).
11.1.1.3. About the LVF Unit
[Procedures]
1. Refer to the “Disassembly & Assembly Instructions” and disassemble the LVF Unit.
2. Blow off the dust of LVF Lens Unit with a blower.
3. Wipe off the dirt on the surface of glasses with Lens Cleaning Kit (VFK1900BK), if necessary.