Menu
82
DVQX1052 (ENG)
Indicates parts that may become white saturated through overexposure in a zebra pattern.
Select [SET] to set the brightness to be processed as a zebra pattern.
• You can select a brightness value between [50%] and [105%]. In [Zebra 2], you can select
[OFF]. If you select [100%] or [105%], only the areas that are already white saturated are
displayed in a zebra pattern. The smaller the value is, the wider the brightness range to be
processed as a zebra pattern will be.
• If there are any white saturated areas, we recommend compensating the exposure towards
negative (P38) referring to the histogram and then taking the picture.
• Displayed zebra patterns will not be recorded.
• Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode], [Sleep
Mode(Wi-Fi)] and [Power Save LVF Shooting].
• To turn the monitor/viewfinder on again, press any button.
[Zebra Pattern]
>
[Custom]
>
[Monitor / Display]
>
[Zebra Pattern]
[ZEBRA1]
[ZEBRA2]
[Economy]
>
[Setup]
>
[Economy]
[Sleep Mode]
The camera is automatically turned off if the camera has not been used for
the time selected on the setting.
[Sleep
Mode(Wi-Fi)]
The camera is automatically turned off if it is not connected to a Wi-Fi
network and has not been used for 15 minutes (approx.).
[Auto LVF/
Monitor Off]
The monitor/viewfinder is automatically turned off if the camera has not
been used for the time selected on the setting.
[Power Save LVF
Shooting]
If you enable the automatic viewfinder/monitor switching function (P24)
and display the On-monitor recording information screen (P25) on the
monitor, the camera is automatically turned off when the camera has not
been used for the time selected on the setting.
MENU
MENU
DC-GH5LBodyP-DVQX1052_eng.book 82 ページ ２０１７年２月２日 木曜日 午後３時２１分
